Grab the money and get another as Jeff mentions
"Do you want to work on a boat or go boating "
Hate to lose one, but
Search found 85 matches
- Fri Feb 09, 2024 9:26 am
- Forum: General Topics
- Topic: Scrap it or save it. Need advice!
- Replies: 8
- Views: 1949
- Sun Feb 19, 2023 8:13 pm
- Forum: About My Boat Brags
- Topic: Replacing Breaker in 120 Volt Panel!!!!
- Replies: 4
- Views: 18054
Re: Replacing Breaker in 120 Volt Panel!!!!
Why didn't you use an original style breaker?
Airpax breakers seem to work well.
Airpax breakers seem to work well.
- Wed Feb 15, 2023 8:50 pm
- Forum: Engines
- Topic: Raw water pump replacement.
- Replies: 14
- Views: 81287
- Tue Feb 14, 2023 8:33 pm
- Forum: Engines
- Topic: Raw water pump replacement.
- Replies: 14
- Views: 81287
Re: Raw water pump replacement.
Loosen the belt, remove the whole Sherwood pump assembly. Replace the impeller while off the motor. Install the assembly back on the motor. Line up and start the upper and lower bolts before you tighten any of them. Replacing the impeller in place is tougher and takes longer. Remember your direction...
- Mon Jan 16, 2023 1:17 pm
- Forum: Engines
- Topic: Oil filler gasket- 318/360
- Replies: 12
- Views: 67831
Re: Oil filler gasket- 318/360
Gaskets can be bought at most auto parts stores, for a truck engine , same year as the boat. They still leak, even doubled up. The fix is a grommet with a new breather for the grommet. Bending the wings is helpful also. Look at Mancini racing for the grommet style. They are a bit pricey - there othe...
- Fri Dec 10, 2021 7:35 pm
- Forum: Boat and Hull
- Topic: 41' '88 Marquis - General questions on
- Replies: 18
- Views: 32664
Re: 41' '88 Marquis - General questions on
Can't wait to see that boat Bill !
- Fri Dec 10, 2021 7:33 pm
- Forum: Engines
- Topic: CW rotation Build
- Replies: 15
- Views: 25491
Re: CW rotation Build
BigM Steve, :idea: Lakeland Auto and Marine in Port Clinton Ohio just posted a Facebook video about this subject. ;) His name is Chris Hamm I believe. Very knowable on Chrysler Marine engines. :geek: bill Chris at Lakeland will turn the crank knurling down smooth, at that point you can use a standa...
- Sun Nov 14, 2021 7:39 pm
- Forum: Engines
- Topic: CW rotation Build
- Replies: 15
- Views: 25491
Re: CW rotation Build
Harry is correct. The CW crank has the knurling at the main seal opposite of CCW to push the oil in the proper direction. Other than that, they are the same.
- Mon Nov 08, 2021 6:39 pm
- Forum: General Topics
- Topic: Politicals & this board
- Replies: 6
- Views: 11293
Re: Politicals & this board
If it only held up as well as our boats..
If not- lets fix boats and get sunsets from the helm !
If not- lets fix boats and get sunsets from the helm !
- Wed Mar 03, 2021 7:26 pm
- Forum: Drivetrain
- Topic: Replacing seals in transmissions / 1989 32 Sedan
- Replies: 13
- Views: 29658
Re: Replacing seals in transmissions / 1989 32 Sedan
Eric , I paid $1450 at Washington Marine here in Cincinnati in Jan 2020 for a starboard rebuild. They are a certified repair shop for Velvet Drives. Seems a little high , but it is Florida. I would always do a complete rebuild , with the costs that near each other.