Search found 35 matches
- Sat Feb 17, 2024 8:26 pm
- Forum: Cabin and Interior
- Topic: Interior wood
- Replies: 9
- Views: 90076
Re: Interior wood
There was C teak trim all around the edge, I knocked that off to see the edge, it’s thick plywood that I’m gonna use to patch a too large of a hole that was cut into the galley counter top..
- Tue Dec 12, 2023 6:55 pm
- Forum: Cabin and Interior
- Topic: Interior wood
- Replies: 9
- Views: 90076
Re: Interior wood
Oh, the door is 72” long, 2 5/16 thick about 18” wide and it weighs good.
- Mon Dec 11, 2023 7:02 pm
- Forum: Cabin and Interior
- Topic: Interior wood
- Replies: 9
- Views: 90076
Re: Interior wood
I’ll have to cut into the door to find out, not very keen the the plastic stuff.
- Sun Dec 10, 2023 12:19 pm
- Forum: Cabin and Interior
- Topic: Interior wood
- Replies: 9
- Views: 90076
Re: Interior wood
Treated teak. The question is will the teak used in the interior last as well on the exterior.?
- Sat Dec 09, 2023 6:04 pm
- Forum: Cabin and Interior
- Topic: Interior wood
- Replies: 9
- Views: 90076
Re: Interior wood
I have a full size door that was for the rear head, I removed it, but need some new steps for the outside, will it hold up if treated?
- Thu Dec 07, 2023 1:19 pm
- Forum: Cabin and Interior
- Topic: Interior wood
- Replies: 9
- Views: 90076
Interior wood
I have a 1988 37’ Double Cabin with of course wood on the interior, doors and drawers, would this be the same teak that was used on the outside steps?
- Sat Sep 23, 2023 1:30 pm
- Forum: Topside Paint and Preparation
- Topic: Sanding to bright Aluminum
- Replies: 16
- Views: 277430
Re: Sanding to bright Aluminum
It’ll be a bit, those need to go down on a freshly painted hull, that’ll be done and everything needed on the dry.
- Thu Sep 21, 2023 6:54 pm
- Forum: Topside Paint and Preparation
- Topic: Sanding to bright Aluminum
- Replies: 16
- Views: 277430
Re: Sanding to bright Aluminum
https://www.hullshield.net/
This one will be easier to get to.
This one will be easier to get to.
- Thu Sep 21, 2023 6:52 pm
- Forum: Topside Paint and Preparation
- Topic: Sanding to bright Aluminum
- Replies: 16
- Views: 277430
Re: Sanding to bright Aluminum
https://l.facebook.com/l.php?u=https%3A%2F%2Fget.hullshield.net%2Fsave1%3Ffbclid%3DIwAR1COzNu35qgRsawn1egHJ2Vy-A4T52nfLEfVKY3U7dtpcc0TrT-KmJw4Ts_aem_ATwnMBrPAn-55uRt3HomDopVbGXpfymhr-sioQA6WHphFj8T8YNtuKkpqFM-n_eQPr6X9zcbc40zf6eyDxzarVNR&h=AT1NrpaviQ5syRN7l6SGpC2LgwCxngXpL8iGCJxvdK1euR8CX1fj1cIs...
- Sun Sep 17, 2023 5:30 pm
- Forum: Topside Paint and Preparation
- Topic: Sanding to bright Aluminum
- Replies: 16
- Views: 277430
Re: Sanding to bright Aluminum
I see many still want to do it like it has always been done. I contacted a rep for this company and NO primer is needed but you can put one on if you want. But, all existing hull anti foul paint needs to be removed. I’m going to use this and an ultrasonic anti fouling to save from the monthly hull c...