Marinette Boat Forum

You can check the direction of rotation of the starter motor by connecting it to a battery, but you can just look at the gear on the Bendix that engages the ring gear and match your old and a new starter. There is a slight bevel to the teeth of the gear to help it engage. Opposite rotation starters ...

Taylor Swift

Junkyard

Or clean it well and use silicone gasket caulk. You are not sealing any pressure, it doesn't take much.

You can measure it where the shaft connects to the transmission. In the engine compartment.

Put an adjustable wrench over the shaft and tighten it until it is snug. Then remove it and measure the gap between the jaws with a tape measure. Write the size on the bulkhead for the next time.

Boss says to quit goofing off and get the chores done. But first, you going to put a custom picture on the back of your cards?

They get caught falsifying records and breaking environmental laws every summer in Alaska. I've seen the sludge behind the cruise ships leave a trail as far as you can see. Next time I will notify the Coast Guard, I have a private number I can call on my cell phone just for this.