Search found 60 matches

by Joe
Tue Jun 05, 2018 8:45 pm
Forum: Props
Topic: Spacing between prop and rudder
Replies: 2
Views: 266

Re: Spacing between prop and rudder

In theory, the space between the back of the prop and the cutless bearing should not be more the twice the diameter of the shaft.
by Joe
Sun Mar 25, 2018 9:58 am
Forum: Topside Paint and Preparation
Topic: Topside Paint
Replies: 8
Views: 1191

Re: Topside Paint

This is after 3 1/2 years sitting in the marina. In the water the whole time. No buffing, No wax. Just Awlgrip boat soap only. Very happy.
by Joe
Sun Mar 25, 2018 8:59 am
Forum: Topside Paint and Preparation
Topic: Topside Paint
Replies: 8
Views: 1191

Re: Topside Paint

Awlgrip , Imron. I would consider "professional " Both are 2 part. Meaning you need to know what your doing. Both will give you a very hard finish. The interlux is a single. Softer finish. I used the Awlgrip system when I painted mine. "Butt" I had access to a paint booth that th...
by Joe
Wed Feb 07, 2018 7:58 pm
Forum: General Topics
Topic: 39 Sedan purchase & transport
Replies: 23
Views: 2841

Re: 39 Sedan purchase & transport

You really need 5 men. One in each corner and one to feed the cables and wires. On the ground 2 men can handle the bridge , butt its all you want.
by Joe
Wed Feb 07, 2018 7:53 pm
Forum: General Topics
Topic: 39 Sedan purchase & transport
Replies: 23
Views: 2841

Re: 39 Sedan purchase & transport

Not the best pics. I painted mine in 2012/13 All my pics are on a computer with a hard drive problem. This is when I first pulled it out to get started. I was about 14'6" tall. Had to dodge the traffic lights.
by Joe
Wed Feb 07, 2018 3:45 pm
Forum: General Topics
Topic: 39 Sedan purchase & transport
Replies: 23
Views: 2841

Re: 39 Sedan purchase & transport

Hello. This is what I did on my 32. First on the lower front deck run 2 2x4s front to rear ,on the lower deck hand rail. Use some pipe strap and wrap around the hand rails. Then cut a 2x4 across the front , and cut 2 legs for the front. to make a frame. Then on the flybridge remove the screws. lift ...
by Joe
Wed Jan 31, 2018 2:33 pm
Forum: General Topics
Topic: 39 Sedan purchase & transport
Replies: 23
Views: 2841

Re: 39 Sedan purchase & transport

The flybridge and the seat post will have to come off to even get close to 14. A 32 sedan ,bridge off, post off. No wheels ,no tires ,no axles on trailer . trailer on 4" equipment moving skates, No props, The keel and rudders were a 4x4 off the floor. I got it in to a 12' 4" door opening. ...
by Joe
Sun Oct 22, 2017 5:16 pm
Forum: Boat and Hull
Topic: Aft Deck Restoration
Replies: 58
Views: 11307

Re: Aft Deck Restoration

Hello trying to decide on what to use, on the aft deck . Has anyone used NAUTIFLOOR ? I was looking at the 65TE . I looked at plastek. I did not like the way it was glued together. I seen a swim platform with it. It did not hold up very well. I was going to go with starboard ,Butt the wife likes the...
by Joe
Tue Sep 05, 2017 1:17 pm
Forum: Boat and Hull
Topic: Aft Deck Restoration
Replies: 58
Views: 11307

Re: Aft Deck Restoration

Hello, I will be starting this winter on replacing the aft deck. Do you have any finished pics. I would like to see some different finished pic. Thanks Joe
by Joe
Mon Jun 12, 2017 7:56 pm
Forum: General Topics
Topic: ignition toggle switch replacement
Replies: 6
Views: 1261

Re: ignition toggle switch replacement

I found part number K4s 13-221 sealed unit.

Go to advanced search