Search found 74 matches
- Wed May 27, 2020 4:17 pm
- Forum: Drivetrain
- Topic: 318 "302" heads.....
- Replies: 10
- Views: 26098
Re: 318 "302" heads.....
Hello, First, just to confirm. You have a 1989 .318s? That should be 240 hp with center dumps exhaust manifolds? If so. You need to leave them alone. First the 240 Hp had taller pistons than any car. The 240 were some of the best 318s ever made for marine. If you raise the compression any more you w...
- Mon Dec 23, 2019 9:16 am
- Forum: Electrical and Electronics
- Topic: 32 Sedan Adding Air Conditioning
- Replies: 27
- Views: 46936
Re: 32 Sedan Adding Air Conditioning
Hello. I have a 1988 32 sedan with factory Ac. It has only 1 30 Amp. I in stalled a 3kw westerbeke and a single shore power switch. Been working fine. I almost never use the electric stove. I use a grill. I have the factory electric water heater / also runs off the engine. I have not had any need fo...
- Thu Sep 19, 2019 3:23 pm
- Forum: General Topics
- Topic: Over-wintering boat - in water???
- Replies: 16
- Views: 34678
Re: Over-wintering boat - in water???
Hello, First is this in a marina?, Protected water? Buy the pic it looks to be the river bank. I keep mine in Louisville, In a protected marina, off the river. I can tell you from experience that the water will freeze from the shore out. Here in Louisville. in the winter the water will rise 10 to 15...
- Tue Jun 25, 2019 8:50 pm
- Forum: Engines
- Topic: Findinging TDC and setting Distrib on rebuilt Engine
- Replies: 14
- Views: 40704
Re: Findinging TDC and setting Distrib on rebuilt Engine
I would bring it up on the compression stroke on # 1. Pull the #1 plug. put a screw driver in the hole. "Buy hand" put a socket on the crank bolt and rock it back and forth to make sure the timing markes on the cover and balancer are at o. Them pull the dist. Look at the pump gear slot. Th...
- Tue Jun 25, 2019 5:20 pm
- Forum: Engines
- Topic: Findinging TDC and setting Distrib on rebuilt Engine
- Replies: 14
- Views: 40704
Re: Findinging TDC and setting Distrib on rebuilt Engine
Hello. The oil pump drive gear bellow the distributor, How ? / Or did you time it? it has to be timed. You cant just drop it in.
- Wed Apr 24, 2019 7:19 pm
- Forum: Engines
- Topic: Mechanical to electric fuel pumps
- Replies: 10
- Views: 25929
Re: Mechanical to electric fuel pumps
Hello, First I have been a mechanic for 30 years. I have owned , and worked on many boats. I would not consider an electric fuel pump an "up grade" on a carbureted system. Put a stock pump on it and drive it.
- Tue Apr 09, 2019 5:05 pm
- Forum: General Topics
- Topic: 318 ignition system
- Replies: 46
- Views: 123791
Re: 318 ignition system
You will need the special plug wires. I think they were about 150.00 a set.
- Mon Apr 08, 2019 4:57 pm
- Forum: General Topics
- Topic: 318 ignition system
- Replies: 46
- Views: 123791
Re: 318 ignition system
Hello. Here is my 2 cents worth. I helped a friend replace his dist,s on his 1976 32 with 318's. The DUI system . the dist physical size is quite bigger than the stock dist. The bracket/ plate the module and resistor needs to be moved a little. And their was a issue with the oil sending unit/ alt sw...
- Thu Jan 31, 2019 8:28 pm
- Forum: For Sale or Wanted
- Topic: Stantions and railing mods
- Replies: 18
- Views: 43390
Re: Stantions and railing mods
If you could post a pic of the stands you need, I might have the right ones. I have some off approx. 1975/76. .
- Tue Oct 09, 2018 3:01 pm
- Forum: Props
- Topic: Prop size and operating RPM for 318 Chrysler engines
- Replies: 15
- Views: 39732
Re: Prop size and operating RPM for 318 Chrysler engines
Hello ,Why did you take 16" 15 pitch Off ? Was their a problem? 16" 15 pitch cupped is the correct size.