Search found 6 matches

by pbaker32s
Sun May 13, 2018 11:11 am
Forum: Engines
Topic: 318/392 Stroker Motors
Replies: 23
Views: 1533

Re: 318/392 Stroker Motors

Those acme props will work well on your boat. They should be 15x15.75. My buddy runs 34mph in a 32 fly bridge sedan loaded w/ factory gen set and stock 360’s. You should be able to turn them up more rpm’s and see increased speeds.
by pbaker32s
Mon Feb 12, 2018 10:36 am
Forum: Boat and Hull
Topic: Source for 5/8" starboard marine anti slip
Replies: 7
Views: 680

Re: Source for 5/8" starboard marine anti slip

I got online and was able to order some 5/8 marine grade plywood from Menards . And had it shipped to a local store..Covered it with a newer pattern nautolex ..it lasted 30 + years the first time sitting outside with only a Bimini top up sometimes.. good enough for me..I will never have to deal with...
by pbaker32s
Wed Sep 13, 2017 1:21 pm
Forum: Boat and Hull
Topic: Starter
Replies: 10
Views: 1537

Re: Starter

The problem I'm having is that when I try to start the starter will turn the engine very slowly then stop! I've had starter rebuilt, replaced starter relay, new batteries, removed and cleaned all battery cables! What's else can I check or replaced! Check for water in the cylinders. Maybe Trying to ...
by pbaker32s
Fri Jul 21, 2017 8:06 am
Forum: Boat and Hull
Topic: Transport nightmare
Replies: 8
Views: 1330

Re: Transport nightmare

Good morning. Where did you move your boat from and too? I just bought one and need moved from Port Clinton to Cincinnati. All movers are claiming bridge has to be removed. I have been calling Norris Lake Boat Center but won't return my call. Sure would be nice to see if they could help since famil...
by pbaker32s
Sun Jul 09, 2017 10:33 am
Forum: For Sale or Wanted
Topic: Looking for port hole screens
Replies: 8
Views: 722

Re: Looking for port hole screens

These?

http://beckson.com/catalog/product_info ... ucts_id=44

Recently ordered port lights and gaskets from these folks. Worked perfect and great to do business with
by pbaker32s
Wed May 24, 2017 9:17 am
Forum: Shafts
Topic: Shaft size converting to diesel
Replies: 14
Views: 1415

Re: Shaft size converting to diesel

I'm just a backyard mechanic that don't know much, but I see nowhere in all those numbers and equations the weight factor plugged in . And with 2 engines it seems to me the load on the shafts are divided in half. As light as the boat is my guess is you couldn't get a big enough prop on it to twist a...

Go to advanced search