Search found 173 matches

by Trowerpower
Tue Apr 13, 2021 8:46 am
Forum: Engines
Topic: 318/392 Stroker Motors
Replies: 90
Views: 274445

Re: 318/392 Stroker Motors

Dewinterized March 12th and a vibration showed up. Turned out to be fouled spark plugs caused by a stuck choke on the starboard engine. Hopefully a prop swap when the water warms up a bit.
by Trowerpower
Wed Nov 25, 2020 9:19 am
Forum: Engines
Topic: 318/392 Stroker Motors
Replies: 90
Views: 274445

Re: 318/392 Stroker Motors

Prop swap will have to wait until next spring, winterized the boat yesterday. Put about 40 hours on the motors this season. They are starting and running great, maintaining a consistent engine temperature. Since rebuild they have 308 hours on them.
by Trowerpower
Wed Aug 26, 2020 8:41 pm
Forum: Engines
Topic: 318/392 Stroker Motors
Replies: 90
Views: 274445

Re: 318/392 Stroker Motors

Okay, went to Delta Propeller in Cleves, Ohio today to pick up my stock three blade props after reconditioning. They look like new. They want to add .90 pitch to my 4 blade props, now i just need to switch them. I know a diver. Stay tuned.
by Trowerpower
Wed Aug 26, 2020 8:37 pm
Forum: General Topics
Topic: Pressurized wzter system piping and fittings
Replies: 4
Views: 9851

Re: Pressurized wzter system piping and fittings

Made up a new line with Starbrite fittings. Whoever created theses fittings is a genious. I will install it over the weekend. Thanks for your help! Qest fittings ate gone.
by Trowerpower
Sat Aug 15, 2020 10:39 am
Forum: General Topics
Topic: Pressurized wzter system piping and fittings
Replies: 4
Views: 9851

Pressurized wzter system piping and fittings

Replaced my original hot water on my boat recently and the fittings that connect to the water heater are dripping slightly. I cannot find new fittings like mine anywhere. The plastic tubing has"iapmo" on it. 3/8" x 1/2" od is the size. Thanks!
by Trowerpower
Wed Aug 12, 2020 12:37 pm
Forum: Engines
Topic: Fuel Filter inside our gas tanks
Replies: 5
Views: 13249

Re: Fuel Filter inside our gas tanks

Replaced the fuel pump (mechanical) problem solved.
Did not think it was debris in the fuel system, been buying my gas at the same marina all along. The other engine was doing fine, separate tank.
by Trowerpower
Sun Jul 26, 2020 7:27 am
Forum: Engines
Topic: Fuel Filter inside our gas tanks
Replies: 5
Views: 13249

Fuel Filter inside our gas tanks

Having a fuel delivery problem on our 1987 32ft sedan fly bridge. Is there a filter inside the tank? I believe my fuel pump is the problem. We have two 75 gallon tanks. The starboard engine is running great.Thanks your imput in advance.
by Trowerpower
Tue Jul 21, 2020 3:10 am
Forum: Engines
Topic: 318/392 Stroker Motors
Replies: 90
Views: 274445

Re: 318/392 Stroker Motors

Presently 15 x 14.25 four blade props. I believe it is under propped slightly. I am having the original props reconditioned. I still working with Delta Propeller for a different set.
by Trowerpower
Fri Jun 26, 2020 8:43 am
Forum: Engines
Topic: 318/392 Stroker Motors
Replies: 90
Views: 274445

Re: 318/392 Stroker Motors

1600rpm 10mph, 3,000rpm 20mph.
by Trowerpower
Thu Jun 25, 2020 3:47 pm
Forum: Engines
Topic: 318/392 Stroker Motors
Replies: 90
Views: 274445

Re: 318/392 Stroker Motors

So full of water, eisenglass, full of fuel, curtains all the stuff 26mph at 4,000 rpm. Clean bottom.