Search found 236 matches

by carl
Thu Apr 26, 2018 4:48 pm
Forum: General Topics
Topic: Hatch Gasket Material
Replies: 5
Views: 300

Re: Hatch Gasket Material

The bow hatch on my Marinette is original, it was manufactured by Bomar and they are still in business. When I restored my hatch I called them and parts including gaskets and glue are available from them. I was able to purchase both directly from them and it was a perfect fit. Their customer service...
by carl
Thu Apr 19, 2018 4:42 am
Forum: Electrical and Electronics
Topic: Dual 30 amp shore power
Replies: 7
Views: 1423

Re: Dual 30 amp shore power

My 120 Volt amp meter is wired to a coil behind my breaker panel with two wires, I'm not sure what to call this coil, it could be a shunt but again I am not sure. The two black wires coming into the boat from shore are wrapped around this coil and then on to the two main 30 amp breakers on my AC pan...
by carl
Thu Apr 05, 2018 7:49 am
Forum: Boat and Hull
Topic: Poly Glide Replacement now available on eBay
Replies: 8
Views: 885

Re: Poly Glide Replacement now available on eBay

The last time I spoke with John's Father he did have aluminum track lengths available in stock however he explained the track is not the original extrusion, it does not have the T-slots. This telephone conversation was some time ago when I accidently fumbled and dropped one of my track sections into...
by carl
Tue Apr 03, 2018 4:44 pm
Forum: Boat and Hull
Topic: Poly Glide Replacement now available on eBay
Replies: 8
Views: 885

Re: Poly Glide Replacement now available on eBay

Available now on eBay. Search Marinette boat parts.
by carl
Mon Apr 02, 2018 7:08 pm
Forum: D/C Wiring
Topic: 12 Volt DC Main Panel Restoration
Replies: 9
Views: 1368

Re: 12 Volt DC Main Panel Restoration

All buttoned up and now complete...
by carl
Sun Apr 01, 2018 5:28 pm
Forum: D/C Wiring
Topic: 12 Volt DC Main Panel Restoration
Replies: 9
Views: 1368

Re: 12 Volt DC Main Panel Restoration

This update has been a long time coming. Today I finally finished the 12 Volt DC Main Panel Restoration, installing the 60 amp Maxi Fuse block for our windlass.
by carl
Sat Mar 31, 2018 10:11 am
Forum: General Topics
Topic: Main Station Lower Helm Restoration nearly complete...
Replies: 6
Views: 637

Re: Main Station Lower Helm Restoration nearly complete...

We do indeed have a nice, strong plate under the floor to brace that pedestal!
by carl
Fri Mar 30, 2018 1:10 pm
Forum: General Topics
Topic: Main Station Lower Helm Restoration nearly complete...
Replies: 6
Views: 637

Main Station Lower Helm Restoration nearly complete...

My Main Station Helm restoration in the salon/pilot house is nearly complete. Today I installed a pilot chair, it is a Garelick brand and a good fit for the Marinette with its classic look. It is comfortable and I'm satisfied with how it turned out. I have a little more work in the AC and DC power d...
by carl
Tue Mar 27, 2018 9:23 pm
Forum: Boat and Hull
Topic: Puzzling Plaque?
Replies: 5
Views: 548

Re: Puzzling Plaque? Take a look, I need a little help with this one.

HOW DO I MARK MY BOAT? (Right off the website that documents vessels) "The official number assigned to documented vessels, preceded by the abbreviation “NO.” must be marked in block-type Arabic numerals at least three inches high on some clearly visible interior structural part of the hull. The...
by carl
Tue Mar 27, 2018 7:48 pm
Forum: Boat and Hull
Topic: Puzzling Plaque?
Replies: 5
Views: 548

Re: Puzzling Plaque? Take a look, I need a little help with this one.

Once we figure out what it is I'll need to know if I need to glue it back in there after the restoration of that area is complete.

Go to advanced search