Search found 110 matches

by tundrarules
Fri Nov 17, 2017 6:28 am
Forum: Boat and Hull
Topic: Hull Anodes
Replies: 9
Views: 372

Re: Hull Anodes

I wish I had used a premium caulk around the edge of all my anodes. I think that would keep the mating surface clean for better protection. I haven't read of anyone else doing this. I will do it on my next anode change.
by tundrarules
Sun Oct 22, 2017 7:55 pm
Forum: General Topics
Topic: Magma grill burner replacement tip
Replies: 0
Views: 76

Magma grill burner replacement tip

For the price, the Magma grill parts should last longer but.......... :oops: You will need to replace the burner a few years after purchase. The burner is all but impossible to get off. After reading a few forums threads... I tried PB blaster for a few days with no luck.I tried to cut it off with a ...
by tundrarules
Sun Oct 08, 2017 9:44 am
Forum: Climate Control
Topic: Mermaid AC problem solved
Replies: 3
Views: 315

Re: Mermaid AC problem solved

My AC unit does the same if you get an air leak in the system. 99.9 % of the time it's the filter bowl cap that gets the air leak. Tighten down nuts good to go.
by tundrarules
Thu Aug 17, 2017 7:31 am
Forum: General Topics
Topic: Pumping out your holding tank
Replies: 11
Views: 630

Re: Pumping out your holding tank

All marinas on our lake have free pump out stations. Think they are funded by State and Federal cash....not sure.
by tundrarules
Sat Jul 01, 2017 8:29 am
Forum: Corrosion
Topic: Bow Rail Restoration
Replies: 24
Views: 793

Re: Bow Rail Restoration

Carl,
Thanks very much for documenting your process. This will help us for many years.

:ugeek:
by tundrarules
Sun Jun 11, 2017 9:55 pm
Forum: General Topics
Topic: ignition toggle switch replacement
Replies: 3
Views: 251

Re: ignition toggle switch replacement

What problem do you have with the switch? Are gauges coming on?
by tundrarules
Sun Jun 11, 2017 9:47 pm
Forum: Engines
Topic: 1990 318 won't turn over with ignition plugged in
Replies: 11
Views: 516

Re: 1990 318 won't turn over with ignition plugged in

Crazy! Good find! Ole Dad saves the day! :mrgreen:
by tundrarules
Fri Jun 09, 2017 11:28 am
Forum: Drivetrain
Topic: 360 Chrysler running like crap cont...
Replies: 89
Views: 7222

Re: 360 Chrysler running like crap cont...

That's great news! Saved some bucks for a little while.

Happy Boating :mrgreen:
by tundrarules
Mon Jun 05, 2017 3:04 pm
Forum: Drivetrain
Topic: 360 Chrysler running like crap cont...
Replies: 89
Views: 7222

Re: 360 Chrysler running like crap cont...

Bill, I am running Mallory distributors, high voltage coils, and new 8mm plug wires. The protocol is to use standard plugs and gap. I am on year 4 with the Champion 9 heat range. They all looked good a month ago. I changed the plugs to the 12 heat range as recommended by many. No ballast resistor. Y...
by tundrarules
Tue May 30, 2017 9:27 pm
Forum: Drivetrain
Topic: 360 Chrysler running like crap cont...
Replies: 89
Views: 7222

Re: 360 Chrysler running like crap cont...

I have to admit I bailed on the Pertronix trial run. I was the first one to contact their engineering department because of corrosion. I did two trial runs for them. After second failed distributor I got tired of working for free and bailed. I wasted my money on them. I installed Mallory distributor...

Go to advanced search