Search found 430 matches

by bill
Sat Sep 15, 2018 9:47 am
Forum: Vendors
Topic: Alternators
Replies: 1
Views: 98

Re: Alternators

by bill
Sat Sep 15, 2018 9:29 am
Forum: Vendors
Topic: Alternators
Replies: 1
Views: 98

Alternators

BigM For your reading pleasure. :D MetalHead Site Admin Posts: 245 Joined: Fri Jul 11, 2014 7:03 pm Contact: Contact MetalHead Alternators Postby MetalHead » Sun May 24, 2015 7:03 am This is a cross post from FB. NOTE: I have GM based engines - This may be a little different for Chrysler based engin...
by bill
Fri Sep 14, 2018 8:24 am
Forum: About My Boat Brags
Topic: Bought a 1980 32 SD/FB 360 Chrysler's
Replies: 7
Views: 375

Re: Bought a 1980 32 SD/FB 360 Chrysler's

BigM
:D Nice signature Thanks ;)
bill
by bill
Fri Sep 14, 2018 8:21 am
Forum: Engines
Topic: New owner engine stall issues
Replies: 9
Views: 223

Re: New owner engine stall issues

BigM Welcome, When you buy a used boat you have no clue as to what the previous owner has or has not done to the engines. :( Plug wires could look good on the outside but who knows whats going on inside? Pull the plugs and look at the tips. are the fouled ? or nice and clean with brownish tint? Chec...
by bill
Thu Sep 13, 2018 1:05 pm
Forum: General Topics
Topic: What should the Galvanic meter readings range between?
Replies: 4
Views: 170

Re: What should the Galvanic meter readings range between?

BigM Your meter should tell the acceptable ranges. Look at the fine print for aluminum. ;) Table 1. Galvanic Series Of Metals In Sea Water With Reference To Silver/Silver Chloride Reference Cell [Sea water flowing at 8 to 13 ft./sec. temperature range 50 degree F (10 degree C) to 80 degree F (26.7 d...
by bill
Thu Sep 13, 2018 12:28 pm
Forum: About My Boat Brags
Topic: Bought a 1980 32 SD/FB 360 Chrysler's
Replies: 7
Views: 375

Re: Bought a 1980 32 SD/FB 360 Chrysler's

BigM
Hello and welcome aboard. :D
i sent you a PM :)
Nice pictures.When you get a minute please add a signature to your posts. ;)
bill
by bill
Mon Jul 30, 2018 2:39 pm
Forum: Engines
Topic: Gaskets for San Juan Bellingham strainer
Replies: 10
Views: 555

Re: Gaskets for San Juan Bellingham strainer

BigM Found this from Fastjeff in the vendors list. :arrow: Yeah; make your own out of 1/8 inch vacuum hose (and you'll never be sorry!) Buy a couple foot of it (for ooops) and cut a length that JUST fits into the strainer. Next, using rubber cement and a short length of wire (that slips loosely into...
by bill
Fri Jul 20, 2018 1:39 pm
Forum: Engines
Topic: 360s stalling
Replies: 8
Views: 520

Re: 360s stalling

BigM Bretman, I feel your pain man. Check out my posting "360 chryslers running like crap." :geek: Had my friend Ron come over and set up the timing and adjusted the carbs So far all is good. Planning a trip to Put in Bay Ohio a 75 mile round trip. I will let you know the outcome. :D bill
by bill
Fri Jul 20, 2018 1:31 pm
Forum: For Sale or Wanted
Topic: Wanted 37 or 39 Marinette. Gulf Coast Boat.
Replies: 26
Views: 2569

Re: Wanted 37 or 39 Marinette. Gulf Coast Boat.

I sees it but I don't believe it. :lol:
bill
by bill
Tue Jun 26, 2018 6:37 am
Forum: Drivetrain
Topic: Fuel system upgrades
Replies: 44
Views: 5459

Re: Fuel system upgrades

BigM
Fastjeff,
Please publish the fuel circuit diagram. :)
Thanks
bill

Go to advanced search