Search found 430 matches
BigM For your reading pleasure. :D MetalHead Site Admin Posts: 245 Joined: Fri Jul 11, 2014 7:03 pm Contact: Contact MetalHead Alternators Postby MetalHead » Sun May 24, 2015 7:03 am This is a cross post from FB. NOTE: I have GM based engines - This may be a little different for Chrysler based engin...
BigM Welcome, When you buy a used boat you have no clue as to what the previous owner has or has not done to the engines. :( Plug wires could look good on the outside but who knows whats going on inside? Pull the plugs and look at the tips. are the fouled ? or nice and clean with brownish tint? Chec...
- Thu Sep 13, 2018 1:05 pm
- Forum: General Topics
- Topic: What should the Galvanic meter readings range between?
- Replies: 4
- Views: 149
BigM Your meter should tell the acceptable ranges. Look at the fine print for aluminum. ;) Table 1. Galvanic Series Of Metals In Sea Water With Reference To Silver/Silver Chloride Reference Cell [Sea water flowing at 8 to 13 ft./sec. temperature range 50 degree F (10 degree C) to 80 degree F (26.7 d...
- Mon Jul 30, 2018 2:39 pm
- Forum: Engines
- Topic: Gaskets for San Juan Bellingham strainer
- Replies: 10
- Views: 545
BigM Found this from Fastjeff in the vendors list. :arrow: Yeah; make your own out of 1/8 inch vacuum hose (and you'll never be sorry!) Buy a couple foot of it (for ooops) and cut a length that JUST fits into the strainer. Next, using rubber cement and a short length of wire (that slips loosely into...
BigM Bretman, I feel your pain man. Check out my posting "360 chryslers running like crap." :geek: Had my friend Ron come over and set up the timing and adjusted the carbs So far all is good. Planning a trip to Put in Bay Ohio a 75 mile round trip. I will let you know the outcome. :D bill