Search found 95 matches

by Tuggle
Mon Apr 09, 2018 7:28 am
Forum: D/C Wiring
Topic: fuse block in engine compartment
Replies: 4
Views: 239

Re: fuse block in engine compartment

Had almost the same fuse panel in the same location, shower pump, water pump, toilet and aft bilge pump were wired into it, half the fuses blown the other half missing. Just bought a Blue Sea's breaker panel to rewire everything. Might also add had wires coming off it that went nowhere, just strippe...
by Tuggle
Wed Apr 04, 2018 1:14 pm
Forum: Struts
Topic: Need a strut
Replies: 10
Views: 551

Re: Need a strut

Replaced both of mine last year, bought them directly from Marinette.
by Tuggle
Sat Mar 24, 2018 3:51 pm
Forum: Topside Paint and Preparation
Topic: Topside Paint
Replies: 5
Views: 498

Re: Topside Paint

Painted my hull last summer with Rustoleum Topside, sanded smooth and applied two coats, almost a year later still looks good. Soon as it warms up a little I'll finish the rest. Without question need to wait the 24 hours recommended between coats, or you'll seal the still drying first coat. Might al...
by Tuggle
Sun Mar 11, 2018 6:32 pm
Forum: General Topics
Topic: Windshield Wiper Motor
Replies: 2
Views: 366

Windshield Wiper Motor

Anyone ever replace a windshield wiper motor? My port motor burned up today, guess I'll replace both, was surprised how well they worked, until.
by Tuggle
Fri Mar 02, 2018 11:25 am
Forum: Drivetrain
Topic: Engines ready to install, Finally!
Replies: 12
Views: 1118

Re: Engines ready to install, Finally!

Know that all to well, I was afraid not to have them done. Everything seemed fine but while they were out went ahead and bit the bullet.
by Tuggle
Thu Mar 01, 2018 9:37 am
Forum: Drivetrain
Topic: Engines ready to install, Finally!
Replies: 12
Views: 1118

Re: Engines ready to install, Finally!

Did you have your transmissions rebuilt too?
by Tuggle
Tue Feb 27, 2018 9:29 am
Forum: General Topics
Topic: 318 Belt Size
Replies: 2
Views: 339

318 Belt Size

Anyone know the belt sizes for a standard 318?
by Tuggle
Wed Feb 21, 2018 5:09 pm
Forum: General Topics
Topic: Renaming Boat
Replies: 12
Views: 1063

Re: Renaming Boat

They make rubber wheels just for decal removal.
by Tuggle
Tue Feb 20, 2018 6:01 pm
Forum: Topside Paint and Preparation
Topic: Topside paint question
Replies: 8
Views: 733

Re: Topside paint question

Painted mine with Rustoleum Topside, used the "roll-tip" method. It is important to wait the 24 hours specified between coats. Have done the hull and the stripe, will finish the rest when it warms up a little. So far it has gone on easily and looks great.
by Tuggle
Wed Feb 14, 2018 7:42 pm
Forum: About My Boat Brags
Topic: Can you help me with a model, size, etc?
Replies: 3
Views: 399

Re: Can you help me with a model, size, etc?

A friend had an old houseboat back from the 60's with an Eaton Outdrive, white, Dana and OMC both date back to the 60's, white also. Parts, although few and far between, are still available. Sound familiar?

Go to advanced search