Search found 6 matches

by Parthena2
Wed Oct 14, 2020 10:01 pm
Forum: General Topics
Topic: any hull line drawings?
Replies: 5
Views: 643

Re: any hull line drawings?

Besides being able to service the prop easily, it also made low speed maneuvering with a single screw one heck of a lot easier. Because the drive was gimbled, it could be manually tilted to fore-aft trim the boat, meaning there was no need for trim tabs. I still prefer maneuvering with twin screws, ...
by Parthena2
Sat Oct 10, 2020 1:01 pm
Forum: General Topics
Topic: any hull line drawings?
Replies: 5
Views: 643

Re: any hull line drawings?

back in 2018 MetalHead said it might be an early Eaton out drive.
by Parthena2
Fri Oct 09, 2020 11:54 am
Forum: General Topics
Topic: any hull line drawings?
Replies: 5
Views: 643

Re: any hull line drawings?

Here is all I have on the out-drive. It was a special order. I don't know if this boat was a 28' or a 32', but I suspect it was a 28'. Can anyone make an informed guess? She operated out of Sugar Tree Marina on the Tennessee River in the mid to late 1970's. That marina is at the crossing of I-40 and...
by Parthena2
Wed Oct 07, 2020 9:24 pm
Forum: General Topics
Topic: USCG inspected vessel/ Charter
Replies: 7
Views: 4479

Re: USCG inspected vessel/ Charter

32 Express.jpg
bill wrote:
I did get all the drawings from John Althouse owner of Marinette.
bill


Would you point me in the right direction to get drawings of a 1963 Marinette 31 Express? This is all I have found online.
by Parthena2
Wed Oct 07, 2020 9:00 pm
Forum: General Topics
Topic: any hull line drawings?
Replies: 5
Views: 643

any hull line drawings?

I wish to make a half hull of my mother's 1963 Marinette Express. I found a drawing of a top down view of the deck and interior plan, but no hull line drawings. I have attached a picture of her boat. There is a round window behind the life ring BTW. This particular boat was fitted with an early inbo...
by Parthena2
Wed Feb 14, 2018 4:57 pm
Forum: About My Boat Brags
Topic: Can you help me with a model, size, etc?
Replies: 3
Views: 9358

Can you help me with a model, size, etc?

These are pix of my mother's Marinette, taken in the mid 1970s on the Tennessee River at Cuba Landing Marina near I40. It was unusual in that it had an early I/O drive that was fully mechanical. A crank rotated the external portion 180 degrees, bringing the prop up near the rail for replacement, etc...

Go to advanced search