Search found 123 matches

by Tuggle
Wed Aug 10, 2016 7:08 pm
Forum: Vendors
Topic: Dri-Dek
Replies: 5
Views: 1970

Re: Dri-Dek

Used Race Deck on my pontoon, for my application it works great. Dogs, kids, me climbing in and out with muddy feet, spilled beer, etc. washes right through, have a large pump on the dock with plenty of pressure and volume. Installs easy, many colors, uv stable. Don't know how well it would work wit...
by Tuggle
Wed Aug 10, 2016 6:23 pm
Forum: General Topics
Topic: Head Gasket
Replies: 1
Views: 743

Head Gasket

Glad the Forum is back up thought I might be going at this blind. Be that as it may have narrowed down my overheating down to cylinder six, blown head gasket I hope, some discoloration in the oil, don't won't to run the engine anymore fearing further damage. Should I pull both heads, have them redon...
by Tuggle
Thu Jul 28, 2016 10:28 am
Forum: General Topics
Topic: FWIW - 140 degree thermostats and raw water cooling
Replies: 5
Views: 1332

Re: FWIW - 140 degree thermostats and raw water cooling

Good info, thermostats are on my list of things to change, my port engine runs significantly hotter than my starboard. Being in fresh water, Lake Lanier, what would the optimum temp to run?
by Tuggle
Tue Jul 26, 2016 6:09 pm
Forum: General Topics
Topic: Alternator
Replies: 7
Views: 2068

Re: Alternator

Eric appreciate the offer of the regulator but think I'm going to bite the bullet and replace both with Arco's. Spoke with them today and they walked me through the conversion, not much to it. By the way we're down in Flat Creek, last cove on the left just past FC9, drop by.
by Tuggle
Tue Jul 26, 2016 7:58 am
Forum: Drivetrain
Topic: Carb rebuild time?
Replies: 8
Views: 2207

Re: Carb rebuild time?

Carburetor Specialists in Alpharetta, Ga. did mine, 678-393-1501, not cheap but all things considered happy with the results.
by Tuggle
Mon Jul 25, 2016 7:57 pm
Forum: General Topics
Topic: Alternator
Replies: 7
Views: 2068

Alternator

Got the filters and carbs reinstalled, running great, only to find my starboard alternator is not charging. It is my understanding this setup has a external voltage regulator, how do I determine if it is the alternator or the voltage regulator, probably both. What are the pro's and con's of switchin...
by Tuggle
Tue Jul 19, 2016 10:18 am
Forum: General Topics
Topic: Fuel Pump Replacement
Replies: 5
Views: 1281

Re: Fuel Pump Replacement

Profile updated.
by Tuggle
Mon Jul 18, 2016 6:09 pm
Forum: Vendors
Topic: Machine shop for cylinder head service in Atlanta Area
Replies: 5
Views: 2175

Re: Machine shop for cylinder head service in Atlanta Area

Have used Dover in the past, as stated good people, good price. Gary Grimes in Alpharetta is top of the line, 770-475-5272.
by Tuggle
Sun Jul 17, 2016 5:43 pm
Forum: General Topics
Topic: Fuel Pump Replacement
Replies: 5
Views: 1281

Fuel Pump Replacement

Between new filters and rebuilt carbs guess I'll bite the finale bullet and replace the fuel pumps. Although there working they look extremely old and do not have the tubes to the carbs. These are 318's with Carter four barrels. Summit sells a Carter for $22, Sierra sells what looks to be the same w...
by Tuggle
Fri Jul 15, 2016 12:06 pm
Forum: General Topics
Topic: Fuel Filter
Replies: 20
Views: 4885

Re: Fuel Filter

Was planning on using it in conjunction with a new spin on set up. Let the fuel go threw the perko first then threw the Wix spin on. Hopefully between the two I can keep the carbs clean. With the advent of fuel injection carburetor rebiulders are few and far between, not to mention expensive!

Go to advanced search