Marinette Boat Forum

The boat lists as a Sports-fisher but it really looks like a Express model as it has no upper helm!
Good luck on your quest.
bill

Here is a product thast worth a look
http://www.lowes.com/pd_516565-60080-LX ... yl%2Bplank

Also similar product available at Menards and Home Depot.
bill

Here is a product that maybe worth a look
http://www.lowes.com/pd_516565-60080-LX ... yl%2Bplank
I believe Home Depot and Menards carry a similar product.
bill

Thanks baymarinette. and Bryan ;) 4' x 8' x .090" (approx 1/8") White Fpb panel (fiber glass reinforced) https://www.lowes.com/pd/23-75-in-x-3-98-ft-Embossed-White-Wall-Panel/4768231 also some have used this product in ceiling for insulation :idea: https://www.lowes.com/pd/Reflectix-R-21-2...

Bryan,
Looks great.
I am going to Loews today to check out this product.
Was there any type of insulation between the aluminum and the new material
bill

Bryan,
Did you use any type of vapor barrier
Pictures are always nice. if you can find a way to post them.
bill

Found these. I do not know anything about them. Take a look
http://www.saltysmarine.com/index.php?m ... =84_120_22
also:
http://www.defender.com/product3.jsp?pa ... id=2502045
bill

Bill, Question... (first a bit of a story....) Last year on our annual trip downriver we experienced what might be the same issue that you have run into. However, the problem was on the return leg of our trip and the Port engine had been running for over 4 hours. We were running about 1750 RPM on o...

BigM RustyBoat wrote: After removing all the molded and rotten 1/4" panels from the walls and ceiling i have an idea to use plastic shower type panels to replace them. Has anyone done this before? Look at the vendors list for ceiling and walls material ideas. :) What ever you do don't use that ...

I wonder if you just left the distributor cap off over the winter, would that a eliminated the moisture build up Well heck what do I have to lose
Its only two screws, just have to re install in the spring before launch .
bill