Search found 74 matches
- Sun May 14, 2017 3:40 pm
- Forum: Boat and Hull
- Topic: Custom rear top fabrication
- Replies: 17
- Views: 26220
- Wed Jun 29, 2016 6:39 am
- Forum: Cabin and Interior
- Topic: 32 sedan bridge - location & accessing shower pan pump/reservoir
- Replies: 9
- Views: 13299
Re: 32 sedan bridge - location & accessing shower pan pump/reservoir
There are two finger holes up front. The forward board is the bilge pump. Then their is a finger hole behind it. The aft board gives you access to the shower box. I hope this makes sense. Their are two boards ,with finger holes .Joe
- Wed Jun 15, 2016 3:51 pm
- Forum: Drivetrain
- Topic: 318 stroker motor 330 HP 349 cu.in.
- Replies: 91
- Views: 113574
Re: 318 stroker motor 330 HP 349 cu.in.
Hello, First I am not trying to be negative, Just trying to under stand. You went back with the 318s? , and put a stroker kit?. They dino at 330hp?. They "MAXED" out at 4300 to 4500? . Running stock props 16/15 .If sow ,than something is wrong!. A stock 32 FBS marinette with 318 240hp clea...
- Tue May 17, 2016 2:38 pm
- Forum: Drivetrain
- Topic: Sensor on back of Intake manifold.....
- Replies: 13
- Views: 19370
Re: Sensor on back of Intake manifold.....
Some used a switch for the alternator.
- Thu Mar 10, 2016 6:03 am
- Forum: Drivetrain
- Topic: Twin 360's props
- Replies: 8
- Views: 13287
Re: Twin 360's props
The difference 16x16 and 16x15 would be about 200 to 300 rpm on the top end. Clean bottom,light load,strong engines, you might see 4600 to 4700 max would be a my guess.
- Tue Mar 08, 2016 7:00 pm
- Forum: Drivetrain
- Topic: Twin 360's props
- Replies: 8
- Views: 13287
Re: Twin 360's props
On my 32 with 240 318 with a clean bottom will turn 4500. Max. Dirty and heavy load 4000 to 4200 you would be better off with the 16x15 than the 17s . you do not want the engines to "bog" That is the worst thing you can do!!! The engine should allways be able to turn 4000. If not you have ...
- Wed Feb 24, 2016 11:43 am
- Forum: Cabin and Interior
- Topic: sliding door removal
- Replies: 1
- Views: 5294
Re: sliding door removal
Hello, Remove the screws in the bottom track. slide the track and doors out together. Get someone to help.Joe
- Thu Feb 04, 2016 2:24 pm
- Forum: General Topics
- Topic: Choosing a paint color
- Replies: 22
- Views: 22428
Re: Choosing a paint color
My Way I sent you a private message with my email address. I have pics butt to big for the sight. Easier to send them to you. Joe
- Wed Feb 03, 2016 4:02 pm
- Forum: General Topics
- Topic: Choosing a paint color
- Replies: 22
- Views: 22428
Re: Choosing a paint color
Hello, I painted mine with Awlgrip, Snow white and Jet Black. It is very very very bright white. Love it. In Awlgrip color code I think the Hatteras White is close to the orginal Egg White. Awlgrip is Bad Ass paint!!!! Make shure you understand their paint system very well before you start. Awlgrip ...
- Tue Jan 26, 2016 8:01 pm
- Forum: Cabin and Interior
- Topic: 28 Express Interior Remixes
- Replies: 7
- Views: 11410
Re: 28 Express Interior Remixes
Very nice work.