Marinette Boat Forum

Rob, How tall was that 39 at the seat base. Joe

The Flybridge , and the head linner to remove the seat post. From the factory the seats are through bolted. Joe . I would drive it if possible.

When I had my 32 apart the post was swedged to the base. It does not come apart. The factory through bolted the base. Real pain to remove.The head liner is a real pain to remove. When I put it back I used rivnuts. If you only have a problem with one. I would drill the heads of the screws off. then p...

Hello, I used the top off a 32 express to build my aft deck top. If it is a 32 it would make a very good aft deck top. Joe

Hello, We are on the same page. Butt you can not all ways go by the big orange arrow. The arrow is prop rotation when in forward. "Not engine rotation". From the factory their is a tag on the back of the engine by the distributor . It will read some thing like LM318R for right hand prop ro...

Hello, First. This can get very confusing. The Chrysler engine plate will list a right hand turn ,and a left hand turn. Butt this is the over all with the transmission. On a 1to1 and 1.5 trans the engine and trans turn the same direction when in forward. on the 1.9to1 and 2.0 to 1 they are reverse. ...

Hello, I have a 1988 model with the aluminum tracks. When I painted the boat I took them all out. Had them bead blasted and painted. I left the polyglyde out. And it has worked very good. Originally they had tapered head screws holding the poly,and track down. I used round head stainless screws to h...

The counter is a litter bigger.

Hello, first I could not find the pics. I have looked at one here in Louisville. It was at Marine sales and service. The bed was very nice! Butt their is no dinette. No were to sit and eat. When you come down the steps into the galley on the port side it is all a wall and door to the stand up shower...

Hello, First the hoses are the same. The pumps are the same. One pump body will be 180 of the other. Look and see if the pump body doesn't show the direction of flow. Them figure out which way the belt is turning. I hope this make sense. The hose on the bottom is intake, the hoes on top is out put. ...