Search found 302 matches

by carl
Fri Aug 03, 2018 10:59 am
Forum: General Topics
Topic: Flying Bridge Restoration
Replies: 9
Views: 1460

Re: Flying Bridge Restoration

Today I removed my fly bridge for offsite restoration...Lots more to come on this topic.
by carl
Thu Aug 02, 2018 7:57 am
Forum: General Topics
Topic: Splash Curtains
Replies: 10
Views: 461

Re: Splash Curtains

Come and get them before the dumpster eats them whole...
by carl
Thu Aug 02, 2018 7:11 am
Forum: Electrical and Electronics
Topic: Overhead 12 Volt DC Accessory Panel Restoration
Replies: 25
Views: 4717

Re: Overhead 12 Volt DC Accessory Panel Restoration

Today I installed the two fuse blocks I wrote about earlier in this topic string. Fuse Block No.1 and Fuse lock No.2. The two circuit breakers for these two fuse blocks are located in my overhead 12 Volt DC Accessory Panel and can be individually switched on or off from there. I will be wiring all o...
by carl
Wed Aug 01, 2018 7:26 pm
Forum: General Topics
Topic: Splash Curtains
Replies: 10
Views: 461

Splash Curtains

All of my splash curtains both aft rail and fly bridge along with their metallic framework is headed to the dumpster. If anyone wants them you will need to act quickly. I do not want them and will not reinstall them. I'm going with the classic open rail look.
by carl
Wed Aug 01, 2018 6:39 pm
Forum: Boat and Hull
Topic: Bilge Blower Restoration
Replies: 20
Views: 709

Re: Bilge Blower Restoration

Jeff brings up a very good point that I should have included in my description of the modification upgrade of the bilge blower hose restoration. If you look closely at the picture attached you will see that there are two black tyraps 180 degrees out from one another securing the bilge blower hose to...
by carl
Wed Aug 01, 2018 6:27 am
Forum: Boat and Hull
Topic: Fuel System Restoration: Tanks to Carbs...
Replies: 15
Views: 600

Re: Fuel System Restoration: Tanks to Carbs...

Just purchased two of these mats for rebuilding my port and starboard Rochester Quadrajet carburetors side by side...https://www.jegs.com/i/JEGS/555/80170/10002/-1
by carl
Tue Jul 31, 2018 6:53 pm
Forum: Boat and Hull
Topic: Bilge Blower Restoration
Replies: 20
Views: 709

Re: Bilge Blower Restoration

Starboard side view
by carl
Tue Jul 31, 2018 6:52 pm
Forum: Boat and Hull
Topic: Bilge Blower Restoration
Replies: 20
Views: 709

Re: Bilge Blower Restoration

Port side view
by carl
Tue Jul 31, 2018 6:51 pm
Forum: Boat and Hull
Topic: Bilge Blower Restoration
Replies: 20
Views: 709

Re: Bilge Blower Restoration

Today I fabricated and installed my two single "Bilge Vent Exhaust Hose Anchoring Plates". These measure 6" x 9" and secure the last two remaining passive 3" hoses in the system.
by carl
Mon Jul 30, 2018 9:35 pm
Forum: General Topics
Topic: Stern railing design
Replies: 17
Views: 1081

Re: Stern railing design

All of my splash curtains both aft rail and fly bridge along with their metallic framework is headed for the dumpster. If anyone wants them you will need to act quickly. I do not want them and will not reinstall them. I'm going with the classic open rail look.

Go to advanced search