Search found 76 matches
- Wed May 25, 2016 10:44 pm
- Forum: Drivetrain
- Topic: 360 Chrysler running like crap cont...
- Replies: 96
- Views: 224116
Re: 360 Chrysler running like crap cont...
I know that there are so many different components that can cause these problems. Intermittent issues are the worst to diagnose, and many owners AND technicians will start to change parts to find the problem. Sometimes it works, sometimes it doesnt. Sometimes it will temporarily mask the real probl...
- Wed May 25, 2016 10:18 pm
- Forum: Drivetrain
- Topic: 360 Chrysler running like crap cont...
- Replies: 96
- Views: 224116
Re: 360 Chrysler running like crap cont...
You have diligently worked through a lot on this deal but don't forget to step back a little and remember it is just Fuel air and spark. Maybe a quick coil and or ignition module swap real time while it is malfunctioning. Shut it Down put a buddy on the helm and jump in there while under way and do ...
- Wed May 25, 2016 3:08 pm
- Forum: Cabin and Interior
- Topic: New Pilot and co-pilot seats this spring, new and old pic's
- Replies: 8
- Views: 19439
Re: New Pilot and co-pilot seats this spring, new and old pic's
The overhead lights are original as far as I know, they are just incandescent side mountable bulb sockets with tubular shaped light bulbs, 110v.
- Wed May 25, 2016 3:02 pm
- Forum: Drivetrain
- Topic: sherwood kit
- Replies: 9
- Views: 12253
Re: sherwood kit
http://www.pumpvendor.com/repair.html
I used these guys for a quick turn around option a few years ago and they came through great. Got us moving again as we were on a long trip and needed a pump tomorrow and not a kit for it.
I used these guys for a quick turn around option a few years ago and they came through great. Got us moving again as we were on a long trip and needed a pump tomorrow and not a kit for it.
- Tue May 24, 2016 8:57 am
- Forum: Drivetrain
- Topic: Ignition modules, are they all created equal in terms of quality
- Replies: 4
- Views: 8603
Re: Ignition modules, are they all created equal in terms of quality
What is that second sensor with two wires doing ? or is it the one in the series with the engine alarms Marinette installed ? If so then what is the one wire sensor ??
- Mon May 23, 2016 2:23 pm
- Forum: Drivetrain
- Topic: 360 oil treatment
- Replies: 4
- Views: 8341
Re: 360 oil treatment
I have personally seen some stuff from the parts store called " valve medic " loosen or disolve the buildup in some lifters and they returned to normal. ??
- Mon May 23, 2016 1:03 pm
- Forum: Drivetrain
- Topic: Ignition modules, are they all created equal in terms of quality
- Replies: 4
- Views: 8603
Ignition modules, are they all created equal in terms of quality
Seems funny that my boat is 32 years old and late last season I saw what looked like the potting compound running out of one of the ign. module on port, now both are doing the same thing. I have had one engine turn off like a light switch running on top of the water and this is likely the cause. Res...
- Sun May 22, 2016 10:54 pm
- Forum: Drivetrain
- Topic: Looking for a 3 way water manifold for one of my 440's
- Replies: 2
- Views: 6364
Re: Looking for a 3 way water manifold for one of my 440's
When I worked on it last, I remember that is seemed like a soldered up copper arrangment, kind of thin walled too cause it appeared the guy had done the deforming with a screw driver trying to dislodge the hose that was obviously stuck on there tight. I ordered the new hose section and will be diggi...
- Sun May 22, 2016 9:26 pm
- Forum: Cabin and Interior
- Topic: Marine Air
- Replies: 15
- Views: 25720
Re: Marine Air
I installed HVAC in my boat that was never originally equipped and I choose and installed the Flagship Marine FM20R 20,000 btu unit with 2.2 KW of electric heat and it works great. it is the larges unti they make for use on 110v. I really liked the idea of having heat when the boat was out on the ha...
- Sun May 22, 2016 6:51 pm
- Forum: Drivetrain
- Topic: Looking for a 3 way water manifold for one of my 440's
- Replies: 2
- Views: 6364
Looking for a 3 way water manifold for one of my 440's
I am looking for the 3 way raw water suction side manifold for one of my 440's I done my spring ride with the engines for a little ways with a bright flash light and an IR temp gun this afternoon while the wife drove and discovered one of the bypass hoses that run from a 3 way manifold on the suctio...