Marinette Boat Forum

Probably correct; it might distort being pulled off.

Why are you removing the pulley? (If the unit needs a rebuild, you're better off by far buying a new unit for the rebuild kit is expensive.) The pulley does not have to come off to change the impeller.

Jeff

"When in doubt, look for a bad ground."

Good advice!

Jeff

No reason it won't work just fine. Please report on it next winter at haul out.

Jeff

Hang I there. Sounds like it's the starter (or low voltage to it).

Jeff

Most marinas sell 89 octane gas, and a 9:1 compression motor will handle that just fine.

Jeff

Be sure to MARK the pump housing before you do anything since it goes in two ways--and one of them is wrong. Also, make a sketch of which way the impeller fins are bent over so you don't get that wrong--easy to do.

Jeff

You speed freak, you! Love to hear how those monsters worked out.

Jeff

Ah, the second happiest day in a boater's life ....(etc.)

The "Admiral" and I were seriously thinking of buying it to become live-a-boards. Then we woke up!

Jeff

Damn right they should! Good luck.

Jeff

Good to hear from you again!

Jeff