Marinette Boat Forum

Thanks for the input. I was a bit nervous with the coupling idea. I will go ahead and remove and try to match up correct hose type

Someone mentioned possibly cutting out damaged section and install a coupler. The rest of hose actually appears in good condition. Does this seem viable or safe?

Thanks. Tried to find size on old hose but could not see a stamp. Guess will remove and see if can match up somewhere.

Can I assume that since your boat is a '90 then you have Crusader engines? If so then you should have 1 1/4" hardwall water hose (has wire embedded in the rubber). You will have to remove and measure for new since it is sold by the foot. This may offer the opportunity to lengthen or shorten as...

A strong hunch here that you will not enjoy. There is probably no part number for that since water hoses can be in such an infinite range of lengths that they are sold by the foot. I'm afraid you will have to engage a helper to pull this one and replace it with one of the same length that you purch...

Please excuse my lack of mechanical knowledge. I have a 1990 318 that has on port engine a water hose that is in very bad shape. It runs out of a strainer by the seacock lever which I assume is the intake water line. It appears to be quite a thick hose and I have not crawled all the way under to see...

Might work. Not sure where to do that but will check around. Thanks

Hi Folks, if anyone knows of someone trying to salvage Morse Control lever grips both red and both black with hardware I sure could use them. I also need the compass, synchronizer gauge, and the teak mount for each. Still trying to locate to complete my bridge repairs from my improper securing durin...

Thanks!

Thanks Carl,
I have a very novice question on the poly glide. Is this replaced for possible leaking, or if unable to get smooth operation of windows or screens?