Marinette Boat Forum

Those mud dobbers are a pain! On my 73, the air horns are Hadley's with a holding tank in the bilge. The air pump runs off the vacuum off the port carb (sounds like a valve knocking). I tested the horns with a small portable compressor first. The pump was putting out air but was not filling the tank...

Welcome, soap w bleach on the cheap works great from a spray bottle. Be careful and don't slip. I also use a little electric preasure washer that works great less than a $100 and less scrubbing.

Sold

Helpful video, Thanks!

I have a Marinette aluminum bench back seat with 2 access doors to sell $85? I’m located on the east side of Cincinnati. Make me an offer, this needs to go. Thanks Rob text or call (513) 7 zero 8 - 788 seven http://www.pierce3d.com/73M32/Seat1.jpg http://www.pierce3d.com/73M32/Seat2.jpg http://www.p...

It’s cold and I have these pics on my computer to share. Maybe help anybody that wants to do this to their big M. This is how I did my wood on the exterior. No peeling or blisters yet, 2 plus years, knock on wood! I went to the Antique Boat Center here in Cincinnati and if you ever want to see some ...

Welcome and Seanik's right, that's an express. Good luck on your project. Nice you have a trailer for it too. Did you need permits to tow it? I towed a 26' and it seemed huge going down the road.

Hi from freezing cold Ohio. I painted my patina multicolored drk blue, light blue, green, white trim before the cold whether hit. http://www.pierce3d.com/73M32/Panels/ProjB4.jpg Look what I found under the trim panels... http://www.pierce3d.com/73M32/Panels/PanelsBck.jpg Lime gold 699 on all the pan...

Wayne, That's what I'm doing. I watched the sailrite videos too. The guy at the sewing store told me to look for a Singer 301 built in the 50's, they are direct drives, no plastic gears, capable of doing canvas work. I found one on ebay and just took it in for cleaning and tune up. I've never sewed ...