Search found 883 matches
- Fri Apr 07, 2017 10:00 am
- Forum: General Topics
- Topic: Exhaust hose advice
- Replies: 24
- Views: 31647
Re: Exhaust hose advice
If flooding's a possibility, how hard would it be to plug the opening on the outside during repairs?
- Thu Apr 06, 2017 10:36 pm
- Forum: Boat and Hull
- Topic: trim tabs
- Replies: 9
- Views: 11772
Re: trim tabs
My favorite response: what does the mfr say when you inquire? Post that advice here (I know, I know, it's easier to ask us to guess). Seriously, some of the tech depts I've encountered are very helpful
- Thu Apr 06, 2017 10:33 pm
- Forum: Engines
- Topic: Perko 299 separator disassembly
- Replies: 20
- Views: 25085
Re: Perko 299 separator disassembly
It's usually clamped to a cymbal stand near at hand. Liquids of dubious origin are poured into the top and periodically the drain is opened with the purified effuluent liquid going into a purloined cup. Fortifies one to get past some singers and trombone players
- Thu Apr 06, 2017 1:35 am
- Forum: Engines
- Topic: Perko 299 separator disassembly
- Replies: 20
- Views: 25085
Re: Perko 299 separator disassembly
..PS: The handsome dude on the end is our Joel. I don;t know much about the handsome part but we were loud. I had forgotten about that gig. Circa 2010/11, NY eve party at a $3mill mansion in Potomac MD. Home of a voice teacher who built a performance room for her students to resemble the Parthenon....
- Thu Apr 06, 2017 1:31 am
- Forum: General Topics
- Topic: 1984 360 RAW Water Pump
- Replies: 14
- Views: 15390
Re: 1984 360 Water Pump
I believe that my water pump was rebuilt about 4 years ago by the previous owner. How frequently should these be rebuilt? Is it a Sherwood pump? Thank you for your help. Rebuild frequency depends on wear. But In my boat's nearly 20 yr association with me, only one pump had to be replaced, neither w...
- Thu Apr 06, 2017 1:24 am
- Forum: General Topics
- Topic: Anode advice
- Replies: 11
- Views: 13360
Re: Anode advice
You're on the right path. Anodes are not worn past 50% (and recall that when mine did get worn, I put two worn ones together to equal one solid one. I don't think you need to drill more holes. Clean the keel behind the anodes (no paint) and bend them outward just a tad so when you tighten the bolts ...
- Tue Apr 04, 2017 11:14 am
- Forum: Engines
- Topic: Perko 299 separator disassembly
- Replies: 20
- Views: 25085
Re: Perko 299 separator disassembly
having celebrated a really big birthday, I realize I am no longer embarrassed by much, so sure -- I'm curious to see what blackmail ammunition you have in your pouch. . . .
- Fri Mar 31, 2017 3:36 pm
- Forum: Engines
- Topic: Perko 299 separator disassembly
- Replies: 20
- Views: 25085
Re: Perko 299 separator disassembly
"...Still playing drums in the band..." didn't think you remembered. good head on those shoulders. Yep, though spending more on out of town workshops than earning. Always a student. Next week, we will play at one of the Smithsonians where we are all bringing rations in case they try to det...
- Thu Mar 30, 2017 10:31 am
- Forum: Engines
- Topic: Perko 299 separator disassembly
- Replies: 20
- Views: 25085
Re: Perko 299 separator disassembly
Disagree just a bit, Jeff. You are spot on that it is a separator (and I think a very good one) but it does prevent some particles from getting into the line as well. I saw that every time I emptied the canister into a glass jar. That said, the filter Jeff proposes (and had on his boat) is very usef...
- Thu Mar 30, 2017 10:27 am
- Forum: Boat and Hull
- Topic: Hull Preparation & Painting
- Replies: 34
- Views: 48044
Re: Hull Preparation & Painting
You're asking too much of paint. It's not there to protect a very exposed surface (and a pointy one at that) from beachings. Either accept that running the boat onto land will scour the surface or find a product (they are out there) to cover the keel. Bottom paint exists to thwart algae and critters...