Marinette Boat Forum

I have run my old cpap off of a sears jump start box inverter. Recharge it during the day and it will last all night. Also, new cpap has an 12 v adapter that can connect to a marine batt or cig lighter.

Shiny aluminum. Do not paint! And use a stainless steel wire brush to clean the surface where the anodes attach.

I would check grounding and power connections first. Isolate problem by disconnecting upper,then lower helm sync checking each unit with other disconnected. Good luck.

I have heard good things about these generators from a relative. Half the price of a Honda and has a 30 amp plug. Buy 2 and run in parallel for more power. I plan on getting one this season.http://www.northerntool.com/shop/tools/ ... _200623983

There should be an adjuster on the bottom of the screen. Turn it to take the tension off the roller,then pop the screen off.

Was not aware of that. Planning on using Lowrance meters.

Another consideration would be to install flow meters . Putting some on my 32 this year.

no salt water here-fresh water cooling Fresh water cooled = closed loop cooling. Block is filled with automotive type coolant. Raw water i cooled uses seawater(salt or fresh) for the coolant. Lake water is full of minerals and dis similar metals would cause galvanic action and corrode quickly. Cool...

I believe the marine intake is angled to keep your carb as level as possible. There might also be some safety issues involved. I would contact edelbrock and see if the intake was made to fit a marine engine.