Marinette Boat Forum

updated price 2600.00 and will sell for less with some older tires on it for storage.
http://minneapolis.craigslist.org/wsh/b ... 30736.html

Updated price on my trailer. Will sell for a bit cheaper with some older tires on it if you want it for just a storage trailer.
http://minneapolis.craigslist.org/wsh/b ... 30736.html

http://minneapolis.craigslist.org/wsh/b ... 30736.html

this is my trailer. have some wiggle room on price.

http://minneapolis.craigslist.org/wsh/b ... 30736.html

My trailer. I cut about 5' off the end of the frame rails/bunks to better fit my 28',these could easily be welded back on to carry a 32' as that is what was on it when I purchased the trailer.

I just put new wood in my helm seat bottom...$66.00 for a sheet of 3/4 marine plywood from menards will do both seats, back and bottom. $30.00 for an electric stapler. Worst part is pulling the old staples, take your time and don't wreck the vinyl.

Hey, the bilge in the front of the boat is the low point when the boat is level. My boat pumps water from that one regularly. I also have pump in the rear right in front of the rudder log, I've never gotten water to pump from that rear pump. I finally sent you those pics of the wiring I've been mean...

Question, do all alcohol stoves just use denatured alcohol for fuel, or can you safely use denatured in fuel in all alcohol stoves?

I also just bought a 28 express, single 318 that has been sitting for about 3.5 years. I brought home, put generous amounts of marvel in each cylinder and let it sit for 2 days. After sitting for those 2 days I cranked the engine over before reinstalling the plugs to make sure I got oil pressure up...

I also just bought a 28 express, single 318 that has been sitting for about 3.5 years. I brought home, put generous amounts of marvel in each cylinder and let it sit for 2 days. After sitting for those 2 days I cranked the engine over before reinstalling the plugs to make sure I got oil pressure up....

Bill, haha, very funny. Thanks to the rest of you for the useful posts. I will check it out. I trailer the boat for now, but will probably leave it in the water for a week or two at a time once I have all of the bugs worked out so I want to make sure I'm in good shape. It almost looks like the hull ...