Marinette Boat Forum

Thanx for the help. Got one & it will be installed shortly.

MetalHead wrote:Do you have a link to the scope?

https://www.amazon.com/gp/aw/d/B01MYTHW ... UTF8&psc=1

I have an oil leak at back of motor. It looked like it was coming from inspection flap on bell housing. That's bad as I thought rear main seal. I just found that oil is leaking from an oil sending unit. I used this cheap endoscope that hooks to my phone to find it. I recommend these things. That's g...

Then here she is in the water...

As a follow up to this post... Thank you all for the help. I ended up sanding a few spots and painted with Interlux 2000E. I sanded and painted the rudder with 2000E also. Then I put 3 to 4 coats of Interlux Trilux 33 black on the bottom. I cleaned up the anodes and added a couple small anode disks ...

Where is the boat that you were considering?

I finally got some time from work and decent weather to get the first coat of bottom paint done.
It's so late to not be in the water yet...

DougDoty wrote:My front and rear compartments are separated by the firewall in the engine area in my boat so I do not see any flow back and forth.

Same here...
Wasn't the hull designed changed around 1982 or so?

Thank you Doug

Thank you all for the help.
Does anyone have the impeller part details that I might be able to order one.
The only source I have now is a little shop that can match what I remove from the boat. I'd like to have it when I remove the old one.
thanx again