Page 1 of 1
WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover
Posted: Sun Nov 12, 2017 8:45 am
by Leviathon
Looking for a couple things. Need the cover plate for a velvet drive that houses a Neutral safety switch - just need the cover plate. Also, need a prop that measures 16 x 15 x 1 - LEFT HAND ROT.
Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover
Posted: Sun Nov 12, 2017 8:18 pm
by EWRice
Do you need the blockoff plate or the mounting plate for the switch.
Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover
Posted: Sun Nov 12, 2017 11:02 pm
by CaptainOpus
There is one in Cleveland Craigslist
Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover
Posted: Mon Nov 13, 2017 5:42 am
by Leviathon
Thanks Captain Opus. Mounting plate is what is needed on the tranny for the switch. I have switch and thingy that goes under it.
Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover
Posted: Mon Nov 13, 2017 6:10 am
by Leviathon
Shoot - 1 1/4 on the bore - could sleeve it but would rather not.
Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover
Posted: Mon Nov 13, 2017 11:13 am
by EWRice
I have the mounting plate you need. Let me check my prop wall and see if i have what you need. It would need a tune up if i have one.
Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover
Posted: Mon Nov 13, 2017 12:36 pm
by MetalHead
Your boat have 1 inch shafts? Better check that one to make sure with twin 360's .
Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover
Posted: Wed Nov 15, 2017 7:58 pm
by EWRice
I checked my props and every one is RH. No 16s either.