WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover

Post Reply
Leviathon
Aluminum Star
Posts: 138
Joined: Mon Jul 14, 2014 10:04 am

WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover

Post by Leviathon »

Looking for a couple things. Need the cover plate for a velvet drive that houses a Neutral safety switch - just need the cover plate. Also, need a prop that measures 16 x 15 x 1 - LEFT HAND ROT.
Steve and Mary Levi
1973 32' Marinette Fisherman
SBC Crusaders
El Ohssa
St. Joseph, Michigan
EWRice
Royal Aluminum Star
Posts: 319
Joined: Thu Feb 04, 2016 12:37 pm

Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover

Post by EWRice »

Do you need the blockoff plate or the mounting plate for the switch.
Muskegon Lake
1972 32' Express flybridge
"AL13"
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson
CaptainOpus
Tin star
Posts: 33
Joined: Sun Jun 28, 2015 10:43 pm
Location: East of Cleveland

Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover

Post by CaptainOpus »

There is one in Cleveland Craigslist
Leviathon
Aluminum Star
Posts: 138
Joined: Mon Jul 14, 2014 10:04 am

Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover

Post by Leviathon »

Thanks Captain Opus. Mounting plate is what is needed on the tranny for the switch. I have switch and thingy that goes under it.
Steve and Mary Levi
1973 32' Marinette Fisherman
SBC Crusaders
El Ohssa
St. Joseph, Michigan
Leviathon
Aluminum Star
Posts: 138
Joined: Mon Jul 14, 2014 10:04 am

Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover

Post by Leviathon »

Shoot - 1 1/4 on the bore - could sleeve it but would rather not.
Steve and Mary Levi
1973 32' Marinette Fisherman
SBC Crusaders
El Ohssa
St. Joseph, Michigan
EWRice
Royal Aluminum Star
Posts: 319
Joined: Thu Feb 04, 2016 12:37 pm

Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover

Post by EWRice »

I have the mounting plate you need. Let me check my prop wall and see if i have what you need. It would need a tune up if i have one.
Muskegon Lake
1972 32' Express flybridge
"AL13"
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson
MetalHead
Site Admin
Posts: 269
Joined: Fri Jul 11, 2014 6:03 pm

Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover

Post by MetalHead »

Your boat have 1 inch shafts? Better check that one to make sure with twin 360's .
1959 Family Cruiser - Sold - Gary Dick - 12/05/14
1963 Express 31x10 - Sold - Joe & Ginger Tabor - 01/21/2017
1963 Express 31x8.5 - In Dry Dock - Restore Underway
1987 Sportsman - Lay Lake (Coosa River) Alabama
Big BigM 's Rule !!!
Columbiana, AL
EWRice
Royal Aluminum Star
Posts: 319
Joined: Thu Feb 04, 2016 12:37 pm

Re: WANTED Prop LH 16 x 15 x 1, Neutral Safety Switch Cover

Post by EWRice »

I checked my props and every one is RH. No 16s either.
Muskegon Lake
1972 32' Express flybridge
"AL13"
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson
Post Reply