1987 32 Sedan Bridge for sale...

coastie1160870
Tin star
Posts: 37
Joined: Sun Jul 02, 2017 8:09 pm
Location: Curtice Ohio, Lake Erie

1987 32 Sedan Bridge for sale...

Postby coastie1160870 » Sun Oct 25, 2020 12:19 am

I am just putting this out for consideration, due to my becoming a double amputee this past June, 2020..
I have a 1987, 32 foot Sedan with F/B. I have found it hard to get around on board with fake legs and no balance, so I'm thinking of selling...
Yes, it needs some TLC..! Maybe a set of alternators, but they are working now. A new aft deck in the very near future, and maybe a set of batteries.
I have a new Garmin GPS / Chart Plotter - Depth Sounder for the lower helm, and a New, Raymarine Dragon Fly, GPS / Chart Plotter - Depth Sounder for the bridge. It has a Bimini Top for the bridge, a new head pump, and several recent up-grades.
It's coming out of the water for winterization this week ( 10/28/20 ), and going on my yard/storage trailer. I may consider selling the trailer also..
I'm thinking of asking 18K for the boat, 20K with the trailer..
Am I off my rocker, or does this seem like a good starting point..?
20200926_235047 (2).jpg
20201011_222101.jpg
R.A. Campbell
32 Sedan-Bridge
260 Chrysler Twins
" KOKOMO "

Fastjeff
Site Admin
Posts: 1320
Joined: Sat Jul 12, 2014 5:06 am
Location: Rock Halll, MD
Contact:

Re: 1987 32 Sedan Bridge for sale...

Postby Fastjeff » Mon Oct 26, 2020 8:06 am

Sorry to hear that. Good luck to you.

Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington

User avatar
GB49
Aluminum Star
Posts: 158
Joined: Sat Jul 12, 2014 8:23 pm
Location: Catawba Island, OH.

Re: 1987 32 Sedan Bridge for sale...

Postby GB49 » Mon Oct 26, 2020 7:29 pm

Boat looks nice with that red and off white. Assuming the hull is not full of corrosion blisters and the interior has been maintained, engines run etc then 18k is very fair. Might want to start a bit higher and work down?? Always expect a potential owner to offer less.
1986 Sedan 32'. Twin Chrysler 360in^3, 275hp, with K&N flame arrestors.
Forum member since 1998, 1262 original forum posts.