28' Express parts for sale.

express28
Tin star
Posts: 34
Joined: Thu Aug 20, 2015 7:10 pm

28' Express parts for sale.

Postby express28 » Sat Sep 17, 2016 1:39 pm

It's been a fun summer :lol: (not) dismantling my 1977 28' Marinette Express. The job is almost complete now. But wow, what a lot of screws they had in that boat. Now I only have the engine, trans, and exhaust left to remove, oops and the glass windows. So at this point I have a lot of item available if anyone is interested. For the interior I have the head door and side panel, cabinets & drawers, and hatch covers, all are in good condition. The steering console, gauges, circuit breakers, trim tabs, bow/aft and hand railings, aluminum corner trim & curtain hangers, spot light, rod holders, fresh water pump, bilge pumps, props, etc. are also available. Engine (chrysler 318 - 1,316 hours) and other engine parts will be out the next trip to the boat. Boat is located in Southern Maryland and I'm in Pa. So if anyone is interested in any of this great stuff let me know (PM or Email). To many items to show all the pictures here but will send you pictures of items you are interested in.
Jim B.

Rockxx
Tin star
Posts: 97
Joined: Fri Mar 06, 2015 12:39 pm

Re: 28' Express parts for sale.

Postby Rockxx » Sat Sep 17, 2016 8:39 pm

What prop are you running. I'm looking for a 14 x 10 or perhaps 14 X 9, 1" shaft
Thanks,
Rockx
1972 28' express "Safari"
Single Chrysler 318
Center Hill Lake, Tennessee

express28
Tin star
Posts: 34
Joined: Thu Aug 20, 2015 7:10 pm

Re: 28' Express parts for sale.

Postby express28 » Sun Sep 18, 2016 9:14 am

I believe the one I removed the other day was a 14 x 10. Should be a 1" shaft. I have a couple of other spare props also and can let you know what they are when I go back to the boat. Probably in a week.

express28
Tin star
Posts: 34
Joined: Thu Aug 20, 2015 7:10 pm

Re: 28' Express parts for sale.

Postby express28 » Sat Sep 24, 2016 8:11 pm

Rock, I have 4 props that are for a 1" shaft.
1 - 14RH10 cupped edge in good condition
2 - 14RH10 cupped may need some reconditioning
3 - 14R10 in good condition
4 - 14RH10 cupped edge like new condition
Let me know if your interested in any of these.
Jim B.

Fishtale32
Member
Posts: 10
Joined: Fri Apr 29, 2016 9:00 am

Re: 28' Express parts for sale.

Postby Fishtale32 » Sun Sep 25, 2016 4:53 pm

I am looking for a co pilots chair and chair rail track for my 32 Express. Do you still have the helm seats?
FishTale 32
71 32 Express
North Muskegon, MI

Rockxx
Tin star
Posts: 97
Joined: Fri Mar 06, 2015 12:39 pm

Re: 28' Express parts for sale.

Postby Rockxx » Sun Sep 25, 2016 9:03 pm

Jim,
I'm interested in either of the 14 X 10 cupped, in good condition and perhaps the one that needs reconditioning. How much and were are you located.
Thanks,
Rockxx
1972 28' express "Safari"
Single Chrysler 318
Center Hill Lake, Tennessee

Tranquilo
Royal Aluminum Star
Posts: 241
Joined: Mon Sep 08, 2014 8:55 am

Re: 28' Express parts for sale.

Postby Tranquilo » Mon Sep 26, 2016 10:04 am

I'm interested in a prop as well. Is the 14x10 cupped proper for a single 318?

What is the difference between the 14R10 & 14RH10?

I thought it was supposed to be a 14x9.
2x 1973 28 Express - Single 318
New electrical panels, water system and velvet drive
Miami FL & Catawba OH

express28
Tin star
Posts: 34
Joined: Thu Aug 20, 2015 7:10 pm

Re: 28' Express parts for sale.

Postby express28 » Mon Sep 26, 2016 7:33 pm

Fishtale32
Sorry, the seats were the first thing to go.

martindesign
Tin star
Posts: 92
Joined: Sun Mar 29, 2015 2:07 pm

Re: 28' Express parts for sale.

Postby martindesign » Fri Sep 30, 2016 6:12 pm

Capac meter?
Machanic, fabricator, carpenter, plumber, electrician, designer, hotrod builder and glutton for punishment. :ugeek: current boat; 1969 Marinette 32 express bridge 440's
Catawba Oh

express28
Tin star
Posts: 34
Joined: Thu Aug 20, 2015 7:10 pm

Re: 28' Express parts for sale.

Postby express28 » Sat Oct 01, 2016 9:05 am

If you want just the meter, I still have it.
Jim B.

CPAC Meter.jpg