TOOLS

Post Reply
User avatar
bill
Royal Aluminum Star
Posts: 520
Joined: Sat Jul 12, 2014 7:17 am
Location: Grosse Ile MI

TOOLS

Post by bill »

BigM Marinetteman wrote:




Pump Wrenches from MSC Supply for Stuffing boxes


I bought actual pump wrenches from MSC supply ... misplaced one, but having actual pump wrenches is worth it. Bought another. http://www.mscdirect.com/product/details/75315150. Many sizes.

I will never use another "plumbers adjustable wrench."



bill
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
User avatar
bill
Royal Aluminum Star
Posts: 520
Joined: Sat Jul 12, 2014 7:17 am
Location: Grosse Ile MI

Re: TOOLS

Post by bill »

BigM
Thanks GB49 :)
Sounds like a good tool to have in your tool box.

GB49 wrote:
A good tool to use for wire tracing is a tone probe.



bill
Last edited by bill on Sun Mar 07, 2021 1:16 pm, edited 1 time in total.
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
Roger2
Aluminum Star
Posts: 121
Joined: Tue Jul 15, 2014 8:20 am

Re: TOOLS

Post by Roger2 »

I made my packing gland wrenches, cut & welded 1/4 X 1" steel into hex.

Roger
"Sea Jay" a 37' Double cabin with twin factory Volvo diesels, 230 HP each. Twin Disk 1.54 Trans turning DynaQuad 19X21 props.
Roger Brown
Petersburg, IL
User avatar
GB49
Royal Aluminum Star
Posts: 206
Joined: Sat Jul 12, 2014 8:23 pm
Location: Catawba Island, OH.

Re: TOOLS

Post by GB49 »

Link for the Fluke Tone Probe is truncated. Correct link below.

http://www.homedepot.com/p/Fluke-Networ ... /202290922

-Karl
1986 Sedan 32'. Twin Chrysler 360in^3, 275hp.
Forum member since 1998.
Post Reply