Packing or Stuffing box

User avatar
bill
Royal Aluminum Star
Posts: 520
Joined: Sat Jul 12, 2014 7:17 am
Location: Grosse Ile MI

Packing or Stuffing box

Post by bill »

BigM

Good Youtube video for packing stuffing box. :idea:

http://gfopacking.com/

bill
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
Jm1001
New poster
Posts: 4
Joined: Sun Jul 20, 2014 12:46 pm

Re: Packing or Stuffing box

Post by Jm1001 »

Does anyone know if all 1" shafts take 1/4 packing? My 28 express stuffing box needs attention at I cannot tell if it is 1/4 or 5/16.
Fastjeff
Site Admin
Posts: 1520
Joined: Sat Jul 12, 2014 5:06 am
Location: Rock Halll, MD

Re: Packing or Stuffing box

Post by Fastjeff »

When in doubt, go SMALLER and just add an additional ring.

Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington
Captainjack
New poster
Posts: 5
Joined: Tue Aug 19, 2014 12:54 am

Re: Packing or Stuffing box

Post by Captainjack »

I installed this stuff 2 or 3 years ago, dry bilges
are wonderful. Capjac
Big Enough II, 1975, 32' express fb, twin 318's with 1 to 1 transmissions, on beautiful Lake Charlevoix, MI, one more evening cruise please.
Jm1001
New poster
Posts: 4
Joined: Sun Jul 20, 2014 12:46 pm

Re: Packing or Stuffing box

Post by Jm1001 »

Thanks, I will try the 1/4.
User avatar
bill
Royal Aluminum Star
Posts: 520
Joined: Sat Jul 12, 2014 7:17 am
Location: Grosse Ile MI

Re: Packing or Stuffing box

Post by bill »

BigM
Source for odd size rubber hose for stuffing box and rudders.

http://mandrelbendingsolutions.com/5-pl ... r-reducer/

Thanks :) MetalHead

bill
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
MetalHead
Site Admin
Posts: 269
Joined: Fri Jul 11, 2014 6:03 pm

Re: Packing or Stuffing box

Post by MetalHead »

Well I am still researching this actually. This site has the 1-7/8 but the miss match is 1-1/2 , not the needed 1-3/4.

Also with this being a silicon 5 ply hose, need to know how that specs to a typical hose.
1959 Family Cruiser - Sold - Gary Dick - 12/05/14
1963 Express 31x10 - Sold - Joe & Ginger Tabor - 01/21/2017
1963 Express 31x8.5 - In Dry Dock - Restore Underway
1987 Sportsman - Lay Lake (Coosa River) Alabama
Big BigM 's Rule !!!
Columbiana, AL
raymuir
New poster
Posts: 3
Joined: Tue Aug 15, 2017 2:52 pm

Re: Packing or Stuffing box

Post by raymuir »

@ Metalhead....Did you ever find the rudder stuffing box hose in the 1 7/8" x 1 3/4" configuration? I have a 75 32' sedan slipped in Aquia, Virginia that is in dire need of new plastic stuffing boxes which I did find at a ski boat shop in La. The hose has been elusive...Thanks
barkleydave
Site Admin
Posts: 410
Joined: Sat Jul 12, 2014 6:18 am
Location: Kentucky

Re: Packing or Stuffing box

Post by barkleydave »

1987 Marinette 29 FB Sedan
Retired Boat Accident UL and USCG trained investigator
Retired USCG Captain
raymuir
New poster
Posts: 3
Joined: Tue Aug 15, 2017 2:52 pm

Re: Packing or Stuffing box

Post by raymuir »

Thanks Dave, However I have already purchased the plastic stuffing boxes. I need the 1 7/8" x 1 3/4" hose to accommodate the 1 7/8" tube and the stuffing box which is 1 3/4".
Post Reply