Page 1 of 1
Sportsman Waste Holding Tank Size
Posted: Wed Aug 02, 2017 11:50 am
by MetalHead
Does anyone know the correct size of a Sportsman waste holding tank?
Re: Sportsman Waste Holding Tank Size
Posted: Wed Aug 02, 2017 6:52 pm
by Fastjeff
No, but you want the biggest one you can fit!
Jeff
Re: Sportsman Waste Holding Tank Size
Posted: Thu Aug 03, 2017 10:34 pm
by MetalHead
Ha !! I agree !
The angles were driving me nuts so I did a few mockups to get the biggest stock size I could into the area
15 Gallon - 15W x 25L x 11H is the size I am going with. The 20 gallon would not fit the space.
https://www.westmarine.com/buy/todd--1- ... ecordNum=6
This size will give me enough room for a base support and inspection port without making it too tall.
Re: Sportsman Waste Holding Tank Size
Posted: Fri May 11, 2018 10:17 am
by MetalHead
Tank is progressing! I have lots of pictures that I have taken of the process.
Re: Sportsman Waste Holding Tank Size
Posted: Sun Sep 02, 2018 8:22 pm
by MetalHead
I had the tank strapped in and did not like the way it was holding. I decided I wanted a hard mount and came up with this 1/8 inch flat bar, 2 - 10 inch battery hold down kits and some hardware to screw it all together.
Re: Sportsman Waste Holding Tank Size
Posted: Tue Sep 04, 2018 7:46 am
by ddependo
nice job
Re: Sportsman Waste Holding Tank Size
Posted: Tue Sep 04, 2018 7:50 am
by ddependo
Mike, don't forget the vent filter. I will give you one next time you are up.
Wayne
Re: Sportsman Waste Holding Tank Size
Posted: Mon Sep 10, 2018 8:43 am
by MetalHead
Yes, I have that on my list for sure!!