Page 3 of 4

Re: 318/392 Stroker Motors

Posted: Tue May 15, 2018 6:48 am
by Fastjeff
Wheeeew!

Jeff

Re: 318/392 Stroker Motors

Posted: Tue May 15, 2018 9:47 pm
by Trowerpower
Looking forward to trying the props.

Re: 318/392 Stroker Motors

Posted: Wed May 16, 2018 1:58 am
by honestcharlie56
glad to hear the engines don't have to come out. Even though thats probably the easiest part LOL. I probably spent a combined 60 minutes removing and resetting my engines in my M ( NOT counting hooking everything back up). You know we are all picture hungry from the head removal.

Re: 318/392 Stroker Motors

Posted: Mon May 21, 2018 9:23 pm
by Trowerpower
Send me an e mail or phone number i will share photos. Never had much luck posting photos on the forum.

Re: 318/392 Stroker Motors

Posted: Fri May 25, 2018 11:26 pm
by Trowerpower
Ms. PORT back up and running today, gentle treatment for the Memorial Weekend.. will re torque the heads in 20 hours.

Re: 318/392 Stroker Motors

Posted: Tue May 29, 2018 9:11 pm
by Trowerpower
Put 5 hours on the motors over the weekend, all is well so far.

Re: 318/392 Stroker Motors

Posted: Wed May 30, 2018 7:08 pm
by Trowerpower
Put 5 hours on the motors over the Memorial Day Weekend. So far they are doing great. Marine Fel pro gaskets, arp head bolts torqued to 100ft.lbs per their instructions.

Re: 318/392 Stroker Motors

Posted: Tue Jul 17, 2018 10:24 am
by Trowerpower
Checked the head bolts on Monday and they are tight to spec. at 100ft.lbs. after 30 hours of operation.

Re: 318/392 Stroker Motors

Posted: Thu Jul 19, 2018 6:40 am
by Fastjeff
Did any need a bit more oomph?

Jeff

Re: 318/392 Stroker Motors

Posted: Mon Jul 23, 2018 11:37 am
by Trowerpower
No, nothing was below 100 ft. Lbs. Of torque. Running great thank you Lord! We should pull it out of the water in late August and install the 4 blade props and pressure wash the bottom. That will be interesting.