Anyone out there have the info needed for an impeller for a 330 hp 440 Chrysler?
Thanks,
Jeff
Impeller size for a 440 Chrysler
Impeller size for a 440 Chrysler
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington
Re: Impeller size for a 440 Chrysler
I've got one in the package I think in the new to me 37 that just got delivered down here to lake Cumberland. I will try and go take a pic for you. Although I can't load pics here as I don't understand the sizing limitations.
1978 37 Double Cabin
Lake Cumberland KY
Lake Cumberland KY
Re: Impeller size for a 440 Chrysler
Well I was mistaken I have a used impeller it's a jabsco and has a part number of 18948-0001. It is a 12 vane impeller I assume came out of my 440's. I have a spare here labeled gen that is much smaller. Hope this helps.
1978 37 Double Cabin
Lake Cumberland KY
Lake Cumberland KY
-
- Aluminum Star
- Posts: 174
- Joined: Sun Dec 07, 2014 8:50 pm
- Location: Northern Kentucky
Re: Impeller size for a 440 Chrysler
Depends what pump you have. They used a number of them depending on the year. My 87 has Sherwood G7 pumps on it. Impellers should be replaced every two years. Good luck!
Trower Power
1987 32ft Marinette Sedan Flybridge
Blue Sky
twin 392 Chrysler Stroker Motors
Performance Distributors
750 Edlebrocks
fresh water cooled
1.5 to 1 velva-drives
Onan 6.5kw gen set
1987 32ft Marinette Sedan Flybridge
Blue Sky
twin 392 Chrysler Stroker Motors
Performance Distributors
750 Edlebrocks
fresh water cooled
1.5 to 1 velva-drives
Onan 6.5kw gen set
-
- New poster
- Posts: 5
- Joined: Tue Aug 12, 2014 8:09 pm
Re: Impeller size for a 440 Chrysler
If it's an 80's 440, it's the same as an 80's smallblock. Sherwood 10615K. I have the same on in both my 39' and 28'