Impeller size for a 440 Chrysler

Post Reply
Fastjeff
Site Admin
Posts: 1520
Joined: Sat Jul 12, 2014 5:06 am
Location: Rock Halll, MD

Impeller size for a 440 Chrysler

Post by Fastjeff »

Anyone out there have the info needed for an impeller for a 330 hp 440 Chrysler?

Thanks,

Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington
legendlc
Aluminum Star
Posts: 181
Joined: Tue Mar 01, 2016 6:50 pm

Re: Impeller size for a 440 Chrysler

Post by legendlc »

I've got one in the package I think in the new to me 37 that just got delivered down here to lake Cumberland. I will try and go take a pic for you. Although I can't load pics here as I don't understand the sizing limitations.
1978 37 Double Cabin
Lake Cumberland KY
legendlc
Aluminum Star
Posts: 181
Joined: Tue Mar 01, 2016 6:50 pm

Re: Impeller size for a 440 Chrysler

Post by legendlc »

Well I was mistaken I have a used impeller it's a jabsco and has a part number of 18948-0001. It is a 12 vane impeller I assume came out of my 440's. I have a spare here labeled gen that is much smaller. Hope this helps.
1978 37 Double Cabin
Lake Cumberland KY
Trowerpower
Aluminum Star
Posts: 174
Joined: Sun Dec 07, 2014 8:50 pm
Location: Northern Kentucky

Re: Impeller size for a 440 Chrysler

Post by Trowerpower »

Depends what pump you have. They used a number of them depending on the year. My 87 has Sherwood G7 pumps on it. Impellers should be replaced every two years. Good luck!
Trower Power
1987 32ft Marinette Sedan Flybridge
Blue Sky
twin 392 Chrysler Stroker Motors
Performance Distributors
750 Edlebrocks
fresh water cooled
1.5 to 1 velva-drives
Onan 6.5kw gen set
metalmanbret
New poster
Posts: 5
Joined: Tue Aug 12, 2014 8:09 pm

Re: Impeller size for a 440 Chrysler

Post by metalmanbret »

If it's an 80's 440, it's the same as an 80's smallblock. Sherwood 10615K. I have the same on in both my 39' and 28'
Post Reply