Page 1 of 1

Throttle and shift lever handles

Posted: Wed Aug 09, 2017 11:52 pm
by ronmar
I have Morse shift and throttle top mount controls that red and black handles were damaged during transport. Shift and throttles working fine but handles and bolts were damaged. Anyone know where I can find replacements? Need 2 red and 2 black handles with hardware.

Re: Throttle and shift lever handles

Posted: Thu Aug 10, 2017 8:28 pm
by honestcharlie56
I have a 1990 32' as well. Have you ever seen a marinette with controls like these installed?

https://images.jamestowndistributors.co ... 4819-1.jpg

I think they would look much much better. Its one of the few things I don't like about my boat......the originals are very 80's.

Re: Throttle and shift lever handles

Posted: Fri Aug 11, 2017 7:09 am
by Fastjeff
Sorry, but when I moved last year I threw away an entire set of those.

Jeff

Re: Throttle and shift lever handles

Posted: Sat Aug 12, 2017 9:17 am
by ronmar
honestcharlie56 wrote:I have a 1990 32' as well. Have you ever seen a marinette with controls like these installed?

https://images.jamestowndistributors.co ... 4819-1.jpg

I think they would look much much better. Its one of the few things I don't like about my boat......the originals are very 80's.


The newer design do look nice. Nothing wrong with my controls other than losing the handles. Will upgrade one day but trying to save $$ if can locate source for the handles.
Thanks

Re: Throttle and shift lever handles

Posted: Sat Aug 12, 2017 9:18 am
by ronmar
Fastjeff wrote:Sorry, but when I moved last year I threw away an entire set of those.

Jeff

Bummer :(

Re: Throttle and shift lever handles

Posted: Sat Aug 12, 2017 4:12 pm
by MetalHead
My 63 has those Morse controls. You just need the knobs?

Re: Throttle and shift lever handles

Posted: Sat Aug 12, 2017 4:17 pm
by MetalHead

Re: Throttle and shift lever handles

Posted: Tue Aug 15, 2017 12:49 pm
by ronmar
Thanks, These are a different style. Mine are not the round ball style rather are the ones forming a 90 degree angle held on with a single screw running through handle and through shift lever and same for throttle levers. I would post a pic but can't seem to be able to load images.