Stern railing design

Things that are of general interest.
Tuggle
Aluminum Star
Posts: 109
Joined: Sun Jun 26, 2016 4:42 am

Re: Stern railing design

Postby Tuggle » Thu Jun 21, 2018 11:33 am

Currently mine is in good condition but looking down the road have thought about having them redone in sheet aluminum and powder coated. Not only the lower but the fly bridge also. Take the strips or the whole pieces and have them copied, edges smoothed, powder coated and you'd never have to fool with them again.
"Deplorable", 1975 32' Express, Twin 318's, Raw Water Cooled, Lake Lanier, Ga.

legendlc
Tin star
Posts: 53
Joined: Tue Mar 01, 2016 6:50 pm

Re: Stern railing design

Postby legendlc » Thu Jun 21, 2018 2:35 pm

legendlc wrote:On the subject of the splash Curtain mentioned here. I am rebuilding a 37 double cabin and one small piece of curtain was damaged in a storm a few years back while the boat was sitting on blocks. The metal inside the canvas was broken during the storm does anyone know what its called or where to locate it for purchase?
1978 37 Double Cabin
Lake Cumberland KY

jralbert
Site Admin
Posts: 534
Joined: Fri Jul 11, 2014 9:15 pm

Re: Stern railing design

Postby jralbert » Thu Jun 21, 2018 4:10 pm

Re: the metal inside the canvas.
Consider a strip of thin wood molding as an alternative. After all, the purpose of the metal strip, though it's sturdy and hard to break, is to keep the canvas straight and supported. If the wood breaks, it is easy and cheap to replace.
-joel-
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD

EWRice
Royal Aluminum Star
Posts: 246
Joined: Thu Feb 04, 2016 12:37 pm

Re: Stern railing design

Postby EWRice » Thu Jun 21, 2018 4:39 pm

I think they used 1/8" x 3/4" aluminum stock. They used aluminum on mine because it supported the canvas at the aft corners where there was no stanchion. It is all long gone now, and I like it better. Never had a problem getting wet though.
Muskegon Lake
1972 32' Express flybridge
"AL13"
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson

legendlc
Tin star
Posts: 53
Joined: Tue Mar 01, 2016 6:50 pm

Re: Stern railing design

Postby legendlc » Thu Jun 21, 2018 6:24 pm

Great thanks for the ideas
1978 37 Double Cabin
Lake Cumberland KY

javalin390
Royal Aluminum Star
Posts: 257
Joined: Sat Jan 10, 2015 7:14 pm
Contact:

Re: Stern railing design

Postby javalin390 » Thu Jun 21, 2018 8:01 pm

The metal backing in mine were simply a strip of 1/8" x 1" of aluminum stock. Got a new chunk at the local welding hop for 20 bucks or so, cut and bent it to fit.
Jim Elias
1974 37' SedanFlybridge
Twin 360 Chryslers.
Marblehead, Ohio

User avatar
carl
Royal Aluminum Star
Posts: 313
Joined: Sun Feb 08, 2015 5:58 pm

Re: Stern railing design

Postby carl » Mon Jul 30, 2018 9:35 pm

All of my splash curtains both aft rail and fly bridge along with their metallic framework is headed for the dumpster. If anyone wants them you will need to act quickly. I do not want them and will not reinstall them. I'm going with the classic open rail look.
1990 Marinette 32' Sedan Fly Bridge "IKOI"
Twin Crusader 350's (Closed Loop Cooling)
Bow to Stern Full On Restoration in Progress
Chickamauga Lake, Tennessee
A boat is always safe at shore, but that's not what its built for...

User avatar
jennis9
Tin star
Posts: 32
Joined: Fri Oct 06, 2017 11:23 am

Re: Stern railing design

Postby jennis9 » Tue Jul 31, 2018 1:55 pm

John --- it is a spalsh guard It also catches lots of spiders. :) just got a quote to redo mine in a dark navy. I will have the old one in marine blue available to sell this fall - it is for a 32 and in nice shape. You would need to put in the steel rods to keep it tight (im recycling these for the new). it is reinforced to keep the canvas from sagging.

If your old sunbrella is looking dirty - I would use the starbrite mold/mildew cleaner (It works WONDERS!) or a mix of dish soap and diluted bleach this brings the canvas back to life - spray it on wet fabric, and use a soft scrub brush in the grain of the fabric LIGHTLY to get the mix into the fabric, then wait about 15 minutes and blast with the hose. it takes out dirt and mildew - my drop curtain came out great. there are videos on detailing boats and soft car tops and that's where i go the tips on cleaning. the light brushing and letting it sit is easy method.



legend -- I would call the canvas shop, they might have spare
FINALLY GOT IT!
1986 Marinette Express 32
w/twin Chrysler 318s
Located on Lake Erie
FCYC, Cleveland, OH