(am posting this on behalf of user Metalhead)
I am having a tough time finding out how to remove the drive belt and the sea water pump from this engine. It seems the 2 bolts that might be the mounting bolt for the pump are located under a bracket that seem to support the pump. It appears there is a panel under the cabin steps that might be removable to access the front of the engine. I am having no luck removing this panel Am I all wet trying to access the front of the motor through this area under the step? I removed the screws that were in that panel but the panel does not seem to be loose. There is a threshold to the cabin that appears to be holding the panel in place. Any ideas about engine access from the cabin on my 1973 28 ht express
Access to Sea Water Pump & Drive Belt problem
Access to Sea Water Pump & Drive Belt problem
-joel-
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD