Always a pleasure to see your work.
signed,
your twin 1990 in disrepair
Flying Bridge Restoration
Re: Flying Bridge Restoration
Last edited by carl on Wed Jul 10, 2019 10:03 am, edited 1 time in total.
Re: Flying Bridge Restoration
Last edited by carl on Wed Jul 10, 2019 10:03 am, edited 1 time in total.
Re: Flying Bridge Restoration
Last edited by carl on Wed Jul 10, 2019 10:04 am, edited 1 time in total.
Re: Flying Bridge Restoration
Last edited by carl on Wed Jul 10, 2019 10:04 am, edited 1 time in total.
-
- Royal Aluminum Star
- Posts: 258
- Joined: Tue Jul 19, 2016 8:27 pm
- Location: Lake Charles, LA
Re: Flying Bridge Restoration
1990 Marinette 32 Sedan Flybridge "Hubba" Lake Charles, LA
Twin Chrysler 318's
Twin Chrysler 318's
Re: Flying Bridge Restoration
Looks like you have both throttles together and both shifters together. ( assuming the red handles are throttles ) Did it come that way? I am use to shifter and throttle for each engine being together. i.e. The left and right gas in the center, and left shifter on the far left and right shifter on the far right of the quadrant.
BUSIA
located in Ketchikan, Alaska. Gods country
32 foot Marinette (no fly bridge)
twin 350 Crusader (Chev 350) engines
1:1 Borg Warner velvet drive transmissions
Closed cooling (antifreeze in the engine)
Proud to be retired IBEW and an A+P
located in Ketchikan, Alaska. Gods country
32 foot Marinette (no fly bridge)
twin 350 Crusader (Chev 350) engines
1:1 Borg Warner velvet drive transmissions
Closed cooling (antifreeze in the engine)
Proud to be retired IBEW and an A+P
Re: Flying Bridge Restoration
Actually, that's a superior way to arrange the throttles and shifters. Less chance of making a mistake that way, and it makes syncing the engines easier.
Jeff
Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington
Re: Flying Bridge Restoration
Last edited by carl on Wed Jul 10, 2019 10:04 am, edited 1 time in total.
Re: Flying Bridge Restoration
That's what I wondered. Sounds like the factory changed how they installed them on the newer vessels. As long as you have red for the throttles it is understood what they do. Mine were four black handles so I have red tape color coding the throttles and a big L and R under them. Sometimes the driver still will move the wrong one.
Do you have Morse controls? They look different than mine.
Do you have Morse controls? They look different than mine.
BUSIA
located in Ketchikan, Alaska. Gods country
32 foot Marinette (no fly bridge)
twin 350 Crusader (Chev 350) engines
1:1 Borg Warner velvet drive transmissions
Closed cooling (antifreeze in the engine)
Proud to be retired IBEW and an A+P
located in Ketchikan, Alaska. Gods country
32 foot Marinette (no fly bridge)
twin 350 Crusader (Chev 350) engines
1:1 Borg Warner velvet drive transmissions
Closed cooling (antifreeze in the engine)
Proud to be retired IBEW and an A+P
Re: Flying Bridge Restoration
I see you are using the same fuse holders I have. May I suggest that if you have room, that you install an extra one and label it "spare". It sure is nice to have one holding a spare 20 amp fuse right at your finger tips when you need it, or a spare cap if one is bad or gets dropped. Plus it is there if you add something later and need another circuit.
BUSIA
located in Ketchikan, Alaska. Gods country
32 foot Marinette (no fly bridge)
twin 350 Crusader (Chev 350) engines
1:1 Borg Warner velvet drive transmissions
Closed cooling (antifreeze in the engine)
Proud to be retired IBEW and an A+P
located in Ketchikan, Alaska. Gods country
32 foot Marinette (no fly bridge)
twin 350 Crusader (Chev 350) engines
1:1 Borg Warner velvet drive transmissions
Closed cooling (antifreeze in the engine)
Proud to be retired IBEW and an A+P