28 prop recommendation

Post Reply
User avatar
shade2u2
Royal Aluminum Star
Posts: 290
Joined: Mon Jul 21, 2014 3:11 pm
Location: Marietta, Ohio -mile marker 172

28 prop recommendation

Post by shade2u2 »

It looks like I probably need to have my prop redone or replaced.
My boat is a 1984 28 with single engine 360. My current 3 blade prop looks to be a 16x14 that was originally 17x15. It runs about 27-28 mph at WOT (4200 rpm) with this prop.
Should I stay with the 16x14 prop?
What about a 4 blade for these boats?
Thanx in advance for any opinions.
John
1986 39 Sedan w/Crusader 454 & 1.92 drive.
former - '84 28 Express Hardtop w/single 360 1.5:1 drive (SOLD - now in Uruguay)
Ohio and Muskingum Rivers (Marietta, OH)
Fastjeff
Site Admin
Posts: 1521
Joined: Sat Jul 12, 2014 5:06 am
Location: Rock Halll, MD

Re: 28 prop recommendation

Post by Fastjeff »

My advise? Stick to what's working. Also, from my experience, a 4 blade prop creates a noticeably faster idle speed. (That made for some thrilling docking until I learned to shift in and out of neutral, regularly.)

If that's not a concern, you MIGHT get better plane off with the 4 bladed, but be careful selecting it. From my experience, a 17 x 15 four blader was 400 rpms lower at WOT than my old 16 x 16 three bladers. I know: a mixture of apple and oranges, but that extra blade pushes a bunch more water.

Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington
User avatar
shade2u2
Royal Aluminum Star
Posts: 290
Joined: Mon Jul 21, 2014 3:11 pm
Location: Marietta, Ohio -mile marker 172

Re: 28 prop recommendation

Post by shade2u2 »

I am planning to stick with the 16x14 that is on the boat. My spare prop is installed.
I hoped have the damaged prop repair to become my spare but I don't think that it is repairable.
This is a picture of it. Does anyone have experience with a blade on a prop being almost completely rebuilt?
Probably going to be looking for a used prop...
Attachments
Prop damage.jpg
John
1986 39 Sedan w/Crusader 454 & 1.92 drive.
former - '84 28 Express Hardtop w/single 360 1.5:1 drive (SOLD - now in Uruguay)
Ohio and Muskingum Rivers (Marietta, OH)
User avatar
Busia
Royal Aluminum Star
Posts: 406
Joined: Tue Jul 15, 2014 12:21 am

Re: 28 prop recommendation

Post by Busia »

Hang that one on the wall.
BUSIA
located in Ketchikan, Alaska. Gods country
32 foot Marinette (no fly bridge)
twin 350 Crusader (Chev 350) engines
1:1 Borg Warner velvet drive transmissions
Closed cooling (antifreeze in the engine)
Proud to be retired IBEW and an A+P
User avatar
shade2u2
Royal Aluminum Star
Posts: 290
Joined: Mon Jul 21, 2014 3:11 pm
Location: Marietta, Ohio -mile marker 172

Re: 28 prop recommendation

Post by shade2u2 »

Anyone know of a good place to get a used prop?
thanx in advance...
John
1986 39 Sedan w/Crusader 454 & 1.92 drive.
former - '84 28 Express Hardtop w/single 360 1.5:1 drive (SOLD - now in Uruguay)
Ohio and Muskingum Rivers (Marietta, OH)
User avatar
shade2u2
Royal Aluminum Star
Posts: 290
Joined: Mon Jul 21, 2014 3:11 pm
Location: Marietta, Ohio -mile marker 172

Re: 28 prop recommendation

Post by shade2u2 »

Well I'm ready to order a new prop.
I have a single 260 HP 360 Chrysler in my 28. The old 360 has 2200 hours on it. Should this vessel achieve more than 28 mph?
Does anyone have the actual spec or manual indicating the WOT for this 1984 360 (260 HP)?
I have a manual for the 275 HP 360 that shows 4200-4800 with 275 HP at 4600 rpm and manual for a 250 HP 360 that shows 250 HP at 4000 rpm & no WOT indicated.
Again mine is a 260 HP. My actual model is M360BWR15-015.
i'm probably being to anal about this but I just want to be sure. I'm wanting to be sure that I'm giving the correct info to Michigan Wheel. So for MW is recommending a 16x13 Nibral with medium cup.
John
1986 39 Sedan w/Crusader 454 & 1.92 drive.
former - '84 28 Express Hardtop w/single 360 1.5:1 drive (SOLD - now in Uruguay)
Ohio and Muskingum Rivers (Marietta, OH)
User avatar
bcassedy
Royal Aluminum Star
Posts: 507
Joined: Sun Jul 13, 2014 10:05 am
Location: Aurora, In.

Re: 28 prop recommendation

Post by bcassedy »

For your piece of mind (and in line with what you're asking), a 2nd opinion will be invaluable. I bought a couple of props this spring from Delta Propeller ( http://www.deltaprop.com/ ). A family situation kept us from putting Sunset Seeker in the water this year so I can't comment on performance. However, I will say that the guy at DP recommended a 4 blade prop (which is what I purchased) over the original 3 blade. You might give them a call to see what the offer/suggest.

Bill
Bill & Sharon Cassedy
"Sunset Seeker"
'88 32' Sedan Bridge to be sold (updtd 1-1-22)
"Sunset Seeker Too" (SS2)
'88 41' Marquis hardtop. (as of 1/1/22)
Located in Aurora, In.
Always fresh water.
Post Reply