Hull plugs
Hull plugs
Hey all, looking for some quick help here. I am going to pick up a 1978 28' express this weekend. It will be getting moved from storage and placed in the water for me to load onto my trailer. I need to make sure I get all the plugs put in and I do not know where they are all located. Any advise will be appreciated, Thank you and cheers.
1972 28' express single 318, working on getting the bugs worked out.
forest lake, mn
Duluth, mn
Washburn, wi
forest lake, mn
Duluth, mn
Washburn, wi
Re: Hull plugs
If your 28' has not been modified by a previous owner...it should have a single drain plug in the forward bilge just aft of the v-berth. This is the lowest part of the boat when it's floating.
Paranoid as I am, I'd take a close look at every part of the bilge that you can get to (including engine room/stern) just to be sure. Some people add drain plugs in the back.
While the boat is in the water you may want to take a peek at the propshaft and rudder packing boxes to see if they leak. Any more than a slow drip means they need to get tightened or possibly re-packed.
Paranoid as I am, I'd take a close look at every part of the bilge that you can get to (including engine room/stern) just to be sure. Some people add drain plugs in the back.
While the boat is in the water you may want to take a peek at the propshaft and rudder packing boxes to see if they leak. Any more than a slow drip means they need to get tightened or possibly re-packed.
Maestro
1986 32' Sedan
Chrysler 360s
1.5:1 Gears, 16x16 props
1970 28' Express
Single Chrysler 440
1:1 Gear, 14x12 prop
Green Bay, WI
1986 32' Sedan
Chrysler 360s
1.5:1 Gears, 16x16 props
1970 28' Express
Single Chrysler 440
1:1 Gear, 14x12 prop
Green Bay, WI
Re: Hull plugs
our 32 had a plug forward.. under the stbd side of the v-berth and another one a little aft of midship just a little stbd of the centerline in the engine compartment. I know that there is a wide difference between the two lengths. Any competent yard hand should be able to identify a drain plug, especially an unplugged one (otherwise known as a hole in the hull)!
-joel-
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
Re: Hull plugs
My 28 has two plugs one aft of the v birth and one in the engine compartment towards the front.
Bob
Bob
Re: Hull plugs
Mine are s.s.- 3/4" pipe thread-7/8 hex head
bill
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
Re: Hull plugs
Thanks guys for the help, just one plug on mine, starboard of center just aft of the v birth. We got the boat loaded on my trailer and home no problem. Looks like the plug on mine may be brass, I have to clean up and check. Should be stainless to prevent corrosion issues correct?
1972 28' express single 318, working on getting the bugs worked out.
forest lake, mn
Duluth, mn
Washburn, wi
forest lake, mn
Duluth, mn
Washburn, wi
Re: Hull plugs
Should be stainless to prevent corrosion issues correct?
Yes. Si. Oui. For Sure.
Yes. Si. Oui. For Sure.
-joel-
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
Re: Hull plugs
Yes!
Jeff
Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington
Re: Hull plugs
Well I must have been overtired from my 22hours of driving, the plug is aluminum or stainless. thanks for the help
1972 28' express single 318, working on getting the bugs worked out.
forest lake, mn
Duluth, mn
Washburn, wi
forest lake, mn
Duluth, mn
Washburn, wi