Prop Size 89 32' SDFB with/318s

Corrosion, Paint, Through Hulls, etc.
Post Reply
ericinga
Aluminum Star
Posts: 170
Joined: Mon Jul 14, 2014 11:21 am
Location: Cumming, GA

Prop Size 89 32' SDFB with/318s

Post by ericinga »

Normally, I would look at Althouse's Marinette site for this information. However, the site is down.

I searched this forum and the size has not been reference in any posts.

What is the prop size for a 1989 32' SDFB with 318's?

Thanks!

Eric
Eric Spies
1989 32 SDFB
Twin 318s
Lake Lanier, GA
Marinette Boat
User avatar
Maestro
Aluminum Star
Posts: 175
Joined: Sat Jul 12, 2014 7:27 pm

Re: Prop Size 89 32' SDFB with/318s

Post by Maestro »

Eric,

If you have 318's with 1:1 velvet drives - props are 14x10 3 blade cupped

If you have 318's with 1.52:1 gear reduction velvet drives - props are 16x15 3 blade cupped

I took a screen-shot of the prop size chart from John's website before it went down. Will try to upload or link it to the forum soon.
Maestro
1986 32' Sedan
Chrysler 360s
1.5:1 Gears, 16x16 props

1970 28' Express
Single Chrysler 440
1:1 Gear, 14x12 prop

Green Bay, WI
barkleydave
Site Admin
Posts: 410
Joined: Sat Jul 12, 2014 6:18 am
Location: Kentucky

Re: Prop Size 89 32' SDFB with/318s

Post by barkleydave »

1987 Marinette 29 FB Sedan
Retired Boat Accident UL and USCG trained investigator
Retired USCG Captain
User avatar
bcassedy
Royal Aluminum Star
Posts: 507
Joined: Sun Jul 13, 2014 10:05 am
Location: Aurora, In.

Re: Prop Size 89 32' SDFB with/318s

Post by bcassedy »

Dave,
You da man!!! Have been wanting this list for some time! Thanks much!!!

Bill
Bill & Sharon Cassedy
"Sunset Seeker"
'88 32' Sedan Bridge to be sold (updtd 1-1-22)
"Sunset Seeker Too" (SS2)
'88 41' Marquis hardtop. (as of 1/1/22)
Located in Aurora, In.
Always fresh water.
Post Reply