carburetor question need to know

Engines, Shafts, Steering, Struts, Rudders, etc.
Post Reply
User avatar
bill
Royal Aluminum Star
Posts: 520
Joined: Sat Jul 12, 2014 7:17 am
Location: Grosse Ile MI

carburetor question need to know

Post by bill »

BigM
I have a Carter AFB carburetor on my Chrysler 360 engine and need to know what thickness the gasket should be between the carb and the manifold :?: How thick was the original gasket from the factory :?:
Please and Thank You
Very needy
bill
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
barefoot99
Tin star
Posts: 85
Joined: Sun Jul 13, 2014 9:44 pm
Location: Cincinnati OH

Re: carburetor question need to know

Post by barefoot99 »

It is a standard gasket @1/8'' thick , never measured the thickness before ? I'll bet Fast Jeff has !
SUP !
1982 32 Sedan FB
2269 hrs
360's-Edelbrocks, DUI
Raw water cooled
Norris Lake
Speedwell,TN.
Post Reply