Chrysler 440 haul out HELP!!

Engines, Shafts, Steering, Struts, Rudders, etc.
newendeavor
Tin star
Posts: 41
Joined: Mon Jul 14, 2014 9:51 am

Re: Chrysler 440 haul out HELP!!

Postby newendeavor » Sun May 08, 2016 5:37 pm

I've rebuilt both my 502ci and also had to strip down to short blocks. We use 4x6 timber and with a Come Along, slide the blocks up the companionway steps. Lift off back deck with a Boom or Bucket Truck.
Must have A Frame lift with rollers, covered floors and back deck with rubber mats and card board and a lot of muscle and finess.
drgonze has it all correct. I was afraid to go out the windows worried about possible damage to the walls around the windows. ( i did job in the water in a fixed dock and was worried about wake.)
New Endeavor
1991 41ft Aft Cabin
Louisville,Ohio River

User avatar
bill
Royal Aluminum Star
Posts: 435
Joined: Sat Jul 12, 2014 7:17 am
Location: Grosse Ile MI

Re: Chrysler 440 haul out HELP!!

Postby bill » Sun May 08, 2016 6:27 pm

BigM
Original post :arrow: "37 F/B Sedan with big sliding glass doors."
If I knew were your home port was :roll: I would loan you the neat over head rail I made to pull engines. :D
bill
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired

Third Owner bill