Sensor on back of Intake manifold.....
Re: Sensor on back of Intake manifold.....
Standard Motor Products PS160 looks closer....
W. J. Brockman
1984 Marinette Express Bridge
Twin 318s 235 hp
Bolles Harbor, Michigan
1984 Marinette Express Bridge
Twin 318s 235 hp
Bolles Harbor, Michigan
Re: Sensor on back of Intake manifold.....
$310 sounds awfully high for oil pressure sensor. They are notoriously weak and should be regularly inspected. After one blew on me (luckily !!! while I was looking at it by chance), I stocked a couple of spares and if they had cost $310 I would have remembered that.
-joel-
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
Re: Sensor on back of Intake manifold.....
I believe a Standard Motor Parts PS160 is more like it
W. J. Brockman
1984 Marinette Express Bridge
Twin 318s 235 hp
Bolles Harbor, Michigan
1984 Marinette Express Bridge
Twin 318s 235 hp
Bolles Harbor, Michigan
Re: Sensor on back of Intake manifold.....
Sorry for the confusion,,,That was a part number not a $ amount
It is a $5 (five dollar) part ..I have seen them as low as $3 and as high as $13
It is a $5 (five dollar) part ..I have seen them as low as $3 and as high as $13
W. J. Brockman
1984 Marinette Express Bridge
Twin 318s 235 hp
Bolles Harbor, Michigan
1984 Marinette Express Bridge
Twin 318s 235 hp
Bolles Harbor, Michigan