A section of our dinette's parquet floor is missing one of the pieces (popped off when lifting the adjacent access panels fpr the AC pump/valve and I didn't notice ). It's possible it's down in the forward bilge but I haven't located it yet. It's likely it'll be "uggy".
Anyone have a spare square section -or- pieces from a square section they'd ne willing to part with?
Thx,
Bill
Dinette parquet, looking for a section
Dinette parquet, looking for a section
Bill & Sharon Cassedy
"Sunset Seeker"
'88 32' Sedan Bridge to be sold (updtd 1-1-22)
"Sunset Seeker Too" (SS2)
'88 41' Marquis hardtop. (as of 1/1/22)
Located in Aurora, In.
Always fresh water.
"Sunset Seeker"
'88 32' Sedan Bridge to be sold (updtd 1-1-22)
"Sunset Seeker Too" (SS2)
'88 41' Marquis hardtop. (as of 1/1/22)
Located in Aurora, In.
Always fresh water.
Re: Dinette parquet, looking for a section
Bill, I don't know exactly what you are looking for, but I picked up a dinette table that is parquet that I most likely will not use. Not sure if that could help?
Steve
Steve
Steve and Mary Levi
1973 32' Marinette Fisherman
SBC Crusaders
El Ohssa
St. Joseph, Michigan
1973 32' Marinette Fisherman
SBC Crusaders
El Ohssa
St. Joseph, Michigan
- ThunderStruck
- Tin star
- Posts: 24
- Joined: Sun Jan 28, 2018 7:00 pm
Re: Dinette parquet, looking for a section
Are you still looking? I am taking up my Parquet floor. I have lots of squares in decent shape...
Mike Calp
ThunderStruck
1978 32' FB Sedan
Twin 318s
Middle River,Md
ThunderStruck
1978 32' FB Sedan
Twin 318s
Middle River,Md
Re: Dinette parquet, looking for a section
I could use a couple of squares. I did find the missing piece of the square I originally mentioned. It had fallen into the forward bilge and floated towards the bow. It showed up when I took a shop vac and was cleaning the water out of the bilge. Floated right up to the vac's nozzle. The fwd bilge pump had caused it to stay forward.
PM me and let me know what arrangements we can make.
Thx!
Bill
PM me and let me know what arrangements we can make.
Thx!
Bill
Bill & Sharon Cassedy
"Sunset Seeker"
'88 32' Sedan Bridge to be sold (updtd 1-1-22)
"Sunset Seeker Too" (SS2)
'88 41' Marquis hardtop. (as of 1/1/22)
Located in Aurora, In.
Always fresh water.
"Sunset Seeker"
'88 32' Sedan Bridge to be sold (updtd 1-1-22)
"Sunset Seeker Too" (SS2)
'88 41' Marquis hardtop. (as of 1/1/22)
Located in Aurora, In.
Always fresh water.
- shade2u2
- Royal Aluminum Star
- Posts: 290
- Joined: Mon Jul 21, 2014 3:11 pm
- Location: Marietta, Ohio -mile marker 172
Re: Dinette parquet, looking for a section
I would also be interested... please.
John
1986 39 Sedan w/Crusader 454 & 1.92 drive.
former - '84 28 Express Hardtop w/single 360 1.5:1 drive (SOLD - now in Uruguay)
Ohio and Muskingum Rivers (Marietta, OH)
1986 39 Sedan w/Crusader 454 & 1.92 drive.
former - '84 28 Express Hardtop w/single 360 1.5:1 drive (SOLD - now in Uruguay)
Ohio and Muskingum Rivers (Marietta, OH)
Re: Dinette parquet, looking for a section
I need some squares as well. I spilled antifreeze on the floor and I think a lot of the parquet might release from the floor. I don't know if I can reglue it. I would like to buy about 20 squares (6 inch by 6 inch.
1988 41 Marinette
Twin Crusader 454-350 hp closed cooling
Westerbeke 8.5 kw BTG
Lake Cumberland, KY
Twin Crusader 454-350 hp closed cooling
Westerbeke 8.5 kw BTG
Lake Cumberland, KY
- ThunderStruck
- Tin star
- Posts: 24
- Joined: Sun Jan 28, 2018 7:00 pm
Re: Dinette parquet, looking for a section
bpboater...PM Me...
Mike Calp
ThunderStruck
1978 32' FB Sedan
Twin 318s
Middle River,Md
ThunderStruck
1978 32' FB Sedan
Twin 318s
Middle River,Md
Re: Dinette parquet, looking for a section
We replaced ours with interlocking foam rubber gym floor tiles, wood grain, looks good, feels good and if its damaged easily replaceable. Might also add very easy to cut, although I cut mine on a band saw you could probably cut it with a razor knife.
"Deplorable", 1975 32' Express, Twin 318's, Raw Water Cooled, Lake Lanier, Ga.