Interior teak laminate

Fresh & Waste Water Systems, Climate Control, etc.
Shadow64
New poster
Posts: 8
Joined: Sun Sep 02, 2018 5:00 pm

Interior teak laminate

Postby Shadow64 » Sat Sep 22, 2018 4:53 pm

Just wondering if anyone knows of a supplier in SE Michigan or the Toledo Ohio area to get a 4x8 sheet of teak veneer 1/4 inch thick. Can you reglue the laminate an if so what type glue to use
Last edited by Shadow64 on Sun Sep 23, 2018 12:15 am, edited 1 time in total.
1980 32' SDFB
Twin 360's
Riverview Yatch Club, Toledo OH
Soon To be named " Finally Free"
Wayne

User avatar
carl
Royal Aluminum Star
Posts: 340
Joined: Sun Feb 08, 2015 5:58 pm

Re: Interior teak laminate

Postby carl » Sat Sep 22, 2018 5:37 pm

Your interior Teak veneered marine plywood is most likely 1/4" but you'll need to challenge/verify this. Try to source here: http://theworkbench.com/about.php
1990 Marinette 32' Sedan Fly Bridge
Twin Crusader 350's
Chickamauga Lake, Tennessee

EWRice
Royal Aluminum Star
Posts: 258
Joined: Thu Feb 04, 2016 12:37 pm

Re: Interior teak laminate

Postby EWRice » Mon Sep 24, 2018 11:36 am

L.L. Johnson lumber in Charlotte, MI.
Muskegon Lake
1972 32' Express flybridge
"AL13"
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson

brokebill
Tin star
Posts: 27
Joined: Sun Jul 13, 2014 6:59 pm
Location: bill@erinet.com

Re: Interior teak laminate

Postby brokebill » Tue Sep 25, 2018 6:23 pm

Homestead Hardwoods LLC, about half way to Cleveland north off the highway. Guy even has his own field of dreams and makes bats. Realy nice people.
Bill Melke
Dayton, Ohio
28' Sedan Restoration
On the hard in Constance KY.