39ft sedan engine hatches

Fresh & Waste Water Systems, Climate Control, etc.
ukester
Tin star
Posts: 82
Joined: Sun Jul 13, 2014 7:13 am

39ft sedan engine hatches

Postby ukester » Sun Jul 03, 2016 5:10 pm

installing a new floor in the salon and running into trouble with the engine hatches-really looking for some sort of metal that attaches to the hatch but overlaps kind of like a t-any one have a idea of where I can find something that would work?

Thanks Mark
mark ucakar

Fastjeff
Site Admin
Posts: 867
Joined: Sat Jul 12, 2014 5:06 am

Re: 39ft sedan engine hatches

Postby Fastjeff » Mon Jul 04, 2016 4:55 am

I used 1/8 x 2 inch aluminum. Easy to drill the zillion holes, then countersink them so the screws are flush. A good hardware store sells it.

Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington

User avatar
bill
Royal Aluminum Star
Posts: 391
Joined: Sat Jul 12, 2014 7:17 am
Location: Grosse Ile MI

Re: 39ft sedan engine hatches

Postby bill » Mon Jul 04, 2016 12:37 pm

BigM

:| or if you are lazy you can buy TACO SS predrilled hatch trim. ;)

http://tacomarine.com/category/cat_alum ... d-Moulding

scroll to the bottom of the page.


bill
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired

Third Owner bill