installing a new floor in the salon and running into trouble with the engine hatches-really looking for some sort of metal that attaches to the hatch but overlaps kind of like a t-any one have a idea of where I can find something that would work?
Thanks Mark
39ft sedan engine hatches
39ft sedan engine hatches
mark ucakar
Re: 39ft sedan engine hatches
I used 1/8 x 2 inch aluminum. Easy to drill the zillion holes, then countersink them so the screws are flush. A good hardware store sells it.
Jeff
Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington
Re: 39ft sedan engine hatches
or if you are lazy you can buy TACO SS predrilled hatch trim.
http://tacomarine.com/category/cat_alum ... d-Moulding
scroll to the bottom of the page.
bill
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill